|
Author
|
Topic: How wide is a 92 Mustang rear?
|
Larry Jennings
Esteemed Member Posts: 157
From:Redwood City, Ca. USA
Registered: Apr 2000
|
posted 05-23-2000 11:06 PM
   
A buddy wants to put an 8.8 (92 Mustang) rear in his Mavrick and needs to know how wide (wheel mounting flange) it is?IP: 63.28.84.220 |
SteveLaRiviere
Big Kahuna Posts: 7360
From:Saco, Maine USA '72 Mustang Sprint 351C '94 F-150 XL 5.8L and a '97 Probe GTS 2.5L DOHC
Registered: May 99
|
posted 09-24-2000 07:40 PM
Does anyone know?Sorry nobody answered, Larry...  ------------------
SteveLaRiviere/Webmaster -- MCA # 47773
'72 Mustang Sprint 351C 4V/FMX/4.30 Trac-Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC/CD4E IP: 64.208.64.38 |
Ked
Esteemed Member Posts: 1940
From:Fayetteville, N.C., U.S.A
Registered: Jul 99
|
posted 09-24-2000 08:22 PM
It's wide enough to put my wide a$$ in. LOL! O.k., so maybe that's not the answer you wanted. Mike? Stewart?? Don't you guys know???? IP: 209.138.187.88 |
I65Stang
Forum Kahuna Posts: 1391
From:Antelope, CA
Registered: Jun 99
|
posted 09-24-2000 08:28 PM
I have one on the side yard from an '89 if you still need the measurement Larry :>).------------------
Tim
1965 Mustang coupe, 200 ci w/ a Holley 2300, Clifford header, and true duals w/ 26" Smithys
http://all.at/mustang
https://mustangsandmore.com/ubb/I65Stang.html IP: 24.11.225.170 |
71ragtop
Forum Kahuna Posts: 1102
From:Atlanta, GA
Registered: May 99
|
posted 09-24-2000 10:14 PM
Steve, is the date on that original post correct? MAY? Hmmmmm....Nope, I don't know the exact measurements. Let's see what the old Haynes manual says...Yikes...it covers 94-99 model years. No luck there. I'll keep digging... Didja check the FOX forum to see if they know? Mike IP: 38.30.8.210 |
I65Stang
Forum Kahuna Posts: 1391
From:Antelope, CA
Registered: Jun 99
|
posted 09-24-2000 10:24 PM
I can find out if he still needs it :>). Have a manual out in the garage and a spare under a tarp :>). I am guessing that since it was posted in May the decision has been made :>).------------------
Tim
1965 Mustang coupe, 200 ci w/ a Holley 2300, Clifford header, and true duals w/ 26" Smithys
http://all.at/mustang
https://mustangsandmore.com/ubb/I65Stang.html IP: 24.11.225.170 |
Stewart
Esteemed Member Posts: 1826
From:Monterey, CA
Registered: Apr 2000
|
posted 09-25-2000 05:42 AM
I don't think my Haynes would have that listed, but I'll check tomorrow when my eye's aint at half-mast. Fighting the nods here as I type...Yawwwwwn, stretch  Tim, maybe you could pop outside to that '89 you have and measure it tomorrow? Stewart IP: 152.163.197.212 |
I65Stang
Forum Kahuna Posts: 1391
From:Antelope, CA
Registered: Jun 99
|
posted 09-25-2000 06:54 PM
I aim to please :>). Its 54" from flange to flange, 60" from drum to drum. ------------------
Tim
1965 Mustang coupe, 200 ci w/ a Holley 2300, Clifford header, and true duals w/ 26" Smithys
http://all.at/mustang
https://mustangsandmore.com/ubb/I65Stang.html IP: 24.11.225.170 |
71ragtop
Forum Kahuna Posts: 1102
From:Atlanta, GA
Registered: May 99
|
posted 09-26-2000 11:55 AM
Thanks Tim!!!Mike IP: 38.30.8.222 |
Mustangsandmore.com Forums
UBBFriend: Email This Page to Someone! 
