|
Author
|
Topic: Full Length headers on automatic?
|
AdrenalineJunky
New to M&M Posts: 7
From:NH
Registered: Aug 2000
|
posted 08-13-2000 01:32 AM
   
Who makes 'em?IP: Logged |
198092capristang
New to M&M Posts: 25
From:cleveland ohio usa
Registered: Jul 2000
|
posted 08-13-2000 04:40 AM
bbk makes them.------------------
I HAVE A MUT! 1980 capri with 92 stang 5.0 body panles and 88 5.0 ho motor with 93 cobra fuel injection upper and lower intake and 93 cobra ecu. and much much more. IP: Logged |
mustangs68
Forum Kahuna Posts: 8709
From:Phoebus Virginia,USA 1968 Fastback & 1995 Vert MCA#39406 M&M #12
Registered: May 99
|
posted 08-13-2000 04:11 PM
Hooker too.
samIP: Logged |
Capri
Forum Kahuna Posts: 815
From:Lyons, ILL, USA
Registered: May 99
|
posted 08-13-2000 10:34 PM
Hey! Welcome to the board! Headers are made by many. From custom, to out of the box. Flotech, which is Holley, Hooker, which is owned by Holley, Headman, and more IM sure Im missing. Tony. IP: Logged |
AdrenalineJunky
New to M&M Posts: 7
From:NH
Registered: Aug 2000
|
posted 08-14-2000 09:50 AM
No of those companies makes full length headers which will work with the AOd tranny. Any suggestions? They all specify the 5-speed. Thanks.IP: Logged |
roger
New to M&M Posts: 25
From:ontario, canada
Registered: Aug 2000
|
posted 08-21-2000 01:07 PM
quote:
Originally posted by AdrenalineJunky:
No of those companies makes full length headers which will work with the AOd tranny. Any suggestions? They all specify the 5-speed. Thanks.
Hey: i'm running full length hooker headers in my 62 fairlane with an aod, they also told me they would only work with the 5-speed.
it did take a little planning & measuring but they're in. had to cut collector and weld back on angled about 1.5" to clear pan rail of aod, throttle cable from windsor fox(who also said hookers could only be installed with 5-speed, ha!)and floor shift from maverick or mustang. hope this helps
roger
IP: Logged |
mustangs68
Forum Kahuna Posts: 8709
From:Phoebus Virginia,USA 1968 Fastback & 1995 Vert MCA#39406 M&M #12
Registered: May 99
|
posted 08-21-2000 04:37 PM
Roger,
a quick welcome to mustangsandmore.------------------
SAM-MCA #39406
1995'Vert.
1968 Mustang Fastback
www.mustangs68.com
The 1968 Mustangs IP: Logged |
BmxKris
Esteemed Member Posts: 180
From:St. Louis Mo Usa
Registered: Nov 99
|
posted 09-06-2000 01:54 AM
check out kaufman products they have a lot of go fast goodies for fords. I think they might make full lengths for mustangs. If not they'll definitly help you put a 460 in that bad boy.IP: Logged |
Moneymaker
Super Kahuna Posts: 5491
From:Lyons, IL, USA
Registered: May 99
|
posted 09-06-2000 11:34 AM
Uh.........excuse me for butting in, but we have had full length Hookers on Tony's Capri with an AOD, and currently have them on our P/SA 89 GT convertable also with an AOD. They fit just fine with no modifications of any kind. Also the Headmans fit as we have installed several sets. I do not like their flanges to the exhaust pipes though.  Alex------------------
Alex Denysenko Co-Administrator and Moderator
Fleet of FoMoCo's too long to list! http://superstockers.homestead.com/week.html IP: Logged |
racin jason
Esteemed Member Posts: 207
From:Quincy, OH
Registered: Jun 99
|
posted 09-07-2000 07:32 PM
A friend of mine has a 87 GT with bbk full lenght headers with no probs. was Aod when he put the headers on but has since been changed to c-4.------------------
Jason Thompson
1973 Mach 1, Q-code 4 speed 3.25 gears
1989 Mustang LX coupe 2.3 3.45 gears,
wants to be a 429 IP: Logged |
Mustangsandmore.com Forums
UBBFriend: Email This Page to Someone! 
