Posts: 73
From:ny
Registered: Jun 99

posted 09-26-2000 04:40 PM               

---

Original 69 9-inch rear out of 390 S-Code with or without center. Has 3:23 open rear with 28 spline axles....Possible trade or sell as whole taking offers....Have pics etc..Excellent shape...
68 429 Forged Rods (used) good shape...100.00
68 429 4V Manifold 50.00
Sway Bar for 69 S-Code 100.00 b.o.

IP: Logged

Posts: 1
From:Los Angeles CA US
Registered: Oct 2000

posted 10-17-2000 10:21 PM               

---

How much are you asking for the rear?

IP: Logged

Posts: 73
From:ny
Registered: Jun 99

posted 10-18-2000 04:38 PM               

---

Tell ya what, look around and make me an offer...Price depends on wether or not you want whole thing..M69

IP: Logged

Posts: 47
From:Bedford
Registered: Jan 2000

posted 12-01-2000 03:47 PM               

---

if you still have the rearend, i'll give you $150 dollars for it. i don't need the center.

jesse

IP: Logged

Posts: 3
From:Los Angeles, Ca, US of A
Registered: Nov 2000

posted 12-04-2000 08:11 PM               

---

hey does M69460 the 460 stands for the type of engine if it does can you let me know did you do it and was it xpensive to do the change let me know please thank you!
Fernando

IP: Logged

Posts: 73
From:ny
Registered: Jun 99

posted 12-04-2000 10:13 PM               

---

Nope the name is no lie wanted to do it since I was little, yes I did, and it was a researchful and long process if you want to do it THE RIGHT WAY....There are alot of bogus suppliers claiming to have the right stuff for this combo and believe me go to the track and try and hook the car up forget it!!! Thats why its pro-street...It cost around a 1000.00 for the mods absolutely necessary to keep the car square..Ive seen 6 of these cars already and showed everyone the tape measure syndrome, and 5 of them were all twisted and out of shape, they were not meant for this...BUT it is possible with supprt in the shock towers, tubular bracing up top, had to make own or exports will work for the backside must support front though same way, every one thinks the back is sufficient its not....Do the research Crites isnt a bad set-up but you will wait they are a small ma-pa shop, STAY AWAY from MPG Service they are liars and @#^*&@^#@ trying to sell parts they didnt have to me for over a year and they were even advertising them (Headers).Besides there setup after research with track boys there set-up is all wrong dont use it!!!! One reason crossmember for trans has to be modded they tellll you they didnt and they did it wrong!! The motor has to come farther back to CORRECT bottom line...It can be done like many others but it wont be the right way...E-mail me for more info....Later......Hi Everyone...........................................................................M69

IP: Logged