Author
|
Topic: ford c-4
|
roger New to M&M Posts: 21 From:ontario, canada Registered: Aug 2000
|
posted 09-19-2000 01:58 PM
rebuilt with shift kit installed approx. 300 miles on tranny. originally out of 77 granada $200.00IP: 142.154.119.83 |
65driver New to M&M Posts: 34 From:Syracuse, NY, USA Registered: Feb 2000
|
posted 09-19-2000 06:25 PM
Roger, I have a couple of questions. What kind of shift kit is it? Who did the rebuild, and did they replace all the wearable parts (clutches, etc.)? How far away from the New York border are you. I am in Syracuse.IP: 24.95.160.214 |
roger New to M&M Posts: 21 From:ontario, canada Registered: Aug 2000
|
posted 09-21-2000 04:49 PM
shift kit was a trans-go, wereable parts that needed replacing were replaced. built by nolan transmissions, they also build trannies for McCrossann off road racing fords (c-4's, c-6's) Nolan just rebuilt the AOD that replaced the c-4 in my F'lane. if you want to talk to nolans can give you #, rick nolan is in Las vegas at some transmission show until Saturday, Sept. 23. i'm in Toronto, Ontario. Roger at: 416-752-6340 thanksIP: 142.154.96.90 |
65driver New to M&M Posts: 34 From:Syracuse, NY, USA Registered: Feb 2000
|
posted 09-26-2000 05:38 PM
Roger, I called the number you posted and left a message. I am interested in buying the transmission. Give me a call 315-453-5619.Chris IP: 24.95.160.61 |
roger New to M&M Posts: 21 From:ontario, canada Registered: Aug 2000
|
posted 09-27-2000 11:55 AM
quote: Originally posted by 65driver: Roger, I called the number you posted and left a message. I am interested in buying the transmission. Give me a call 315-453-5619.Chris
chris: will call you by friday roger
IP: 142.154.109.2 |
roger New to M&M Posts: 21 From:ontario, canada Registered: Aug 2000
|
posted 10-03-2000 11:02 AM
quote: Originally posted by roger: [QUOTE]Originally posted by 65driver: [b]Roger, I called the number you posted and left a message. I am interested in buying the transmission. Give me a call 315-453-5619.Chris
chris: will call you by friday roger[/B][/QUOTE] Chris; need some info to get shipping costs, town you live in, your zip code rogerIP: 142.154.117.37 |
65driver New to M&M Posts: 34 From:Syracuse, NY, USA Registered: Feb 2000
|
posted 10-03-2000 06:04 PM
Roger, I live in Liverpool, New York. Zip is 13090. Its right outside of Syracuse. Can you measure the bolt pattern on the torque convertor? Its either going to be 10 1/2 inches or 11 7/16 inches accross from stud to stud. Thanks,Chris [This message has been edited by 65driver (edited 10-03-2000).] [This message has been edited by 65driver (edited 10-03-2000).] IP: 24.95.160.57 |