Posts: 70
From:Lebanon,TN
Registered: Jan 2000

posted 09-29-2000 08:40 AM               

---

I finally got the new seat upholstry on the new seat buns. The trick was to get the seat cover pulled overon the front and sides as much as possible, then flip it upside down and stand on the bottom sides of the seat frame. Pull on the front and sides and ring the front first. Then work at getting the sides pulled over and rung. This is the only way that I could get the upholstry to work with the new buns. Hope this helps someone else.

IP: 12.3.224.82

Posts: 7360
From:Saco, Maine USA '72 Mustang Sprint 351C '94 F-150 XL 5.8L and a '97 Probe GTS 2.5L DOHC
Registered: May 99

posted 09-29-2000 03:06 PM               

---

Thanks, Rob.

------------------
SteveLaRiviere/Webmaster -- MCA # 47773

IP: 64.208.65.65

Posts: 70
From:Lebanon,TN
Registered: Jan 2000

posted 09-29-2000 04:12 PM               

---

Your welcome. How are you Steve?

IP: 12.3.224.82

Posts: 197
From:Walnut Creek, CA USA
Registered: Jun 99

posted 09-29-2000 06:03 PM               

---

Thanks for the tip, I'll be doing this next weekend.

IP: 157.22.247.18

Posts: 93
From:orlando,florida
Registered: Aug 99

posted 10-01-2000 07:49 PM               

---

Another tip is to put saran wrap on the seat buns first,makes them slide onto the vinyl easier

IP: 209.240.220.200