|
Author
|
Topic: galaxie engine
|
roger
Gearhead Posts: 235
From: ontario, canada
Registered: Aug 2000
|
posted 04-25-2005 06:31 PM
   
A 66 Galxie 500 conv. with 4-speed & what i think is a 390 but don;t know exactly how to tell for sure, anyone help?
if its a 390/4-speed i thought it would be worth the 100 bucks for the mill before its crushed.
Some trim, tail lights if anyone needs small parts let me know
Roger in Toronto
IP: Logged |
SteveLaRiviere
Administrator Posts: 44921
From: Saco, Maine
Registered: May 99
|
posted 04-28-2005 11:56 AM
That's too bad, that sounds like it was a sweet car in it's day.  Read this thread, IDing your engine would be the same procedure:
https://mustangsandmore.com/ubb/Forum8/HTML/000341.html ------------------
'70 Mustang Mach 1 351C 4V/FMX/3.25 Open
'70 Mustang Convertible 250 I6/3 speed/2.79 Open
'72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip [This message has been edited by SteveLaRiviere (edited 04-28-2005).]
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 04-28-2005 12:12 PM
Could be a 352 also.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
roger
Gearhead Posts: 235
From: ontario, canada
Registered: Aug 2000
|
posted 04-28-2005 05:26 PM
my goodness, code Z, i had better scoop this thing, thanks for the info
IP: Logged |
SkinnyMan
Gearhead Posts: 391
From: Tupelo, MS - USA
Registered: Jan 2005
|
posted 08-23-2005 11:24 AM
quote:
Originally posted by roger:
A 66 Galxie 500 conv. with 4-speed & what i think is a 390 but don;t know exactly how to tell for sure, anyone help?
if its a 390/4-speed i thought it would be worth the 100 bucks for the mill before its crushed.
Okay, from a Petersen Ford book I have, that covers '54-72 engines, there are 8 engines listed for 1966.
1 - 352 - which I believe were mostly in trucks - 9.3 cr; 250 hp/352lb/ft - 4v
2 - 390 9.5 cr; 275 hp; 405 lb/ft - 2v
3 - 390 10.5 cr; 315 hp; 427 lb/ft - 4v
4 - 390 11.0 cr; 335 hp; 427 lb/t - 4v
5 - 427 11.0 cr; 410 hp; 476 lb/ft - 4v
6 - 427 11.0 cr; 425 hp; 480 lb/ft - 2-4v
7 - 428 10.5 cr; 345 hp; 462 lb/ft - 4v
8 - 428 10.5 cr; 360 hp; 459 lb/ft - 4vHope this helps. ------------------
SkinnyMan
Tupelo, MS Thank you, Thank you very much! [This message has been edited by SkinnyMan (edited 08-23-2005).]
IP: Logged |
Mustangsandmore Forums
