|
Author
|
Topic: help for maverick lover
|
shinotai
Journeyman Posts: 4
From: Moses Lake, WA, USA
Registered: May 2001
|
posted 05-01-2001 12:24 PM
   
i have a 72 grabber 302 a/t. i found a 73 grabber with a 302 3spd m/t. the question is the two back seat panels, are they the same? also curious on the lower part of the dash, will it bolt up to the 72 as well? also looking at changing the front windshield and driver and passenger window do they fit as well?i have searched the web and they sat the only changes are to the outside appearence of the car, nothing about the interior, any help here would be grateful and very much appreciated before i buy the parts car.
IP: Logged |
69maverick
Gearhead Posts: 313
From: Thomaston,CT.
Registered: Jan 2001
|
posted 05-01-2001 02:09 PM
It should all fit!
IP: Logged |
cpmaverick
Moderator Posts: 873
From: Auburn, AL.
Registered: Jan 2000
|
posted 05-01-2001 08:25 PM
Are you talking about the plastic side panels in the rear? If so then they interchange, but they may not be the same. Some had ashtrays and some had different armrests but they all swap outEverything else should be the same, I'm not sure what changing the lower section of the dash involves (the '73 has a glove compartment, right?) but it should be possible. ------------------
-Charlie Ping
1970 Maverick Grabber
-1987 5.0L B303 roller cam/rockers
-1968 Mustang Toploader
-1977 Lincoln Versailles 9 inch w/discs
-1980 Granada Front Discs
www.MAVERICKGRABBER.com
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
