|
Author
|
Topic: floor boreds
|
infoseeker
Journeyman Posts: 9
From: cleveland, ohio, usa
Registered: Aug 2001
|
posted 09-22-2001 05:09 AM
  
hey does anyone here know where i can get floor boreds for a 1980 capri? is there any web site that sells them? and does anyone know about how much they would cost me?... iv looked everywhere and i havent been able to find floor boreds. but iv found every other body part. well any help is needed. thanks.
IP: Logged |
80 hybrid
Journeyman Posts: 8
From: Kansas City, Mo. USA
Registered: Aug 2001
|
posted 09-27-2001 10:36 PM
Try CJPONYPARTS.COM They have them for 99.00 a piece. Or you can call 1-800-888-6473.Dustin
IP: Logged |
infoseeker
Journeyman Posts: 9
From: cleveland, ohio, usa
Registered: Aug 2001
|
posted 09-27-2001 10:52 PM
Thanks alot for your help. i think ill be getting them from there.
IP: Logged |
80 hybrid
Journeyman Posts: 8
From: Kansas City, Mo. USA
Registered: Aug 2001
|
posted 09-27-2001 11:00 PM
Let me how hard it is to replace the floor boards. I need them for my 80 coupe.
IP: Logged |
infoseeker
Journeyman Posts: 9
From: cleveland, ohio, usa
Registered: Aug 2001
|
posted 09-27-2001 11:03 PM
its not all that hard (im puting them in my 80 capri) lol... u just cut them out.... leave about a half a inch around the floor bored. and lay the new on in place and spot weld in it. then tar around the welds to water proof it and your set (i would paint the floor boreds to be sure they wont rust)
IP: Logged |
80 hybrid
Journeyman Posts: 8
From: Kansas City, Mo. USA
Registered: Aug 2001
|
posted 09-28-2001 03:31 PM
Thanks for the info. Now all I need is to go buy the welder.
Dustin
IP: Logged |
infoseeker
Journeyman Posts: 9
From: cleveland, ohio, usa
Registered: Aug 2001
|
posted 09-28-2001 05:08 PM
lol yeah. same here..... there are some places where you can rent the welder for cheap... theres a diy around where i live that rents them out. and your welcome for the info.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
