2.3 svo - Mustangsandmore Forums

Brought to you in part by:

Mustangsandmore Forums

'79 to '93 -- The Fox Mustang & Capri

2.3 svo

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: 2.3 svo
67coupe Gearhead Posts: 113 From: dallas NC usa Registered: Nov 2000	posted 05-28-2001 11:58 PM hey guys im about to put an 86 svo 2.3 in my 93 that burned up under the hood does anybody have a wiring diagram for the 86 harness ive got the 5.0 harn down pat but this is tottally diffrent than any diagran ive got thanks for any help. ------------------ Josh 67 coupe with 351c 87 bronco II on 33's(now has blown motor:( 30 model A currently rustbucket IP: Logged
cpmaverick Moderator Posts: 908 From: Auburn, AL. Registered: Jan 2000	posted 05-29-2001 10:12 PM There is a great article I believe @ stangnet.com written about installing a 88 Turbo Coupe motor into a late model 4 banger 'stang. Should prove to be very helpful. IP: Logged
67coupe Gearhead Posts: 113 From: dallas NC usa Registered: Nov 2000	posted 06-01-2001 10:25 PM thanks but do u by chance know the link i couldnt find it thanks again. ------------------ Josh 67 coupe with 351c 87 bronco II on 33's(now has blown motor:( 30 model A currently rustbucket IP: Logged
67coupe Gearhead Posts: 113 From: dallas NC usa Registered: Nov 2000	posted 07-08-2001 09:16 PM hey guys anyone got any ideas on where to find some diagrms for the svo motor ive got everything working but the ign i think have a few wires left over that i cant figure out can somebody please help me? ------------------ Josh 67 coupe with 351c 87 bronco II on 33's(now has blown motor:( 30 model A currently rustbucket IP: Logged
Stewart Moderator Posts: 6088 From: Monterey, CA Mustangsandmore Member #437 Registered: Apr 2000	posted 07-08-2001 11:41 PM Checked my Haynes but I couldn't make heads or tales of what hey had in there regarding the chassis electical system. Sorry! Stewart IP: Logged
Velocity0 Journeyman Posts: 86 From: Burnaby, BC Canada Registered: Apr 2001	posted 07-09-2001 03:24 AM I'm great with wiring diagrams... What wires are left over? What colors? and where are they going to? and from? IP: Logged
67coupe Gearhead Posts: 113 From: dallas NC usa Registered: Nov 2000	posted 07-12-2001 06:41 PM everything is hooked up right from what i can tell from the lousy diagrams ive got but still no fire cant get a ground to the coil tried diff. modules but no luck anybody got any suggestions i really appericate the help guys ------------------ Josh 67 coupe with 351c 87 bronco II on 33's(now has blown motor:( 30 model A currently rustbucket IP: Logged
67coupe Gearhead Posts: 113 From: dallas NC usa Registered: Nov 2000	posted 07-12-2001 09:39 PM WELL GUYS I FIGURED IT OUT I WASLOSING POWER TO THE COIL IN START MODE RAN A JUMPER TONIGHT AND IT FIRED UP SO THANKS FOR THE HELP ------------------ Josh 67 coupe with 351c 87 bronco II on 33's(now has blown motor:( 30 model A currently rustbucket IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2001, Steve LaRiviere

Ultimate Bulletin Board 5.47d

Amazon Honor System

[About M&M][Acronym Guide][Calendar of Events][Chat Room][Classified Ads] [Links]
[Members' Photos] [Restoration Info][Tech Tips] [ Technical Articles][Ford Technical Data
[ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]