Velocity0 Journeyman Posts: 86 From: Burnaby, BC Canada Registered: Apr 2001
|
posted 05-12-2001 01:08 AM
I'm hoping someone else has come across this before.I recently changed my clutch and after an hour and a half of trying to put the tranny back in, (It finally went in), It is bolted up to the bellhousing, but the clutch fork is very loose. It kind of flops around. The input shaft of the tranny is through everything and into the pilor bearing but the fork is just loose. Has anyone else come across this? Could it be the wrong pressure plate? Thanks for the help.
IP: Logged |