|
Author
|
Topic: wireing up a 5.0(once was carerated) for efi
|
CapriStang50
Journeyman Posts: 12
From: cleveland, ohio, usa
Registered: Oct 2000
|
posted 10-27-2000 08:07 PM
  
hey has anyone herd of 5.0 TECH GUIDE? cuz theres an article in it called getting wired or get wired i was wondering if any one can help me finmd that on the web or if anyone can tell me how to wire up my car... i have the fu,l wiring harness hooked up and theres 5 or 6 wires on a connector right by the ecu that i herd ineed to cross some of them and hook some others to my tach or something like that but i havent been able to find that article or any one like it. so i hope someone can help me out here iv been working on this car for ever now and still havent gotten any spark to it (thats what those 5 or 6 wires do they have to do with the spark) so is there any one here that has converted a carborated mustang into a fuel injected 5.0? welp thanx i doubt anyone can help me but if u can that thanx alot.------------------
I OWN PROJECT MUT!
IP: Logged |
Stewart
Pit Boss Posts: 3620
From: Monterey, CA Mustangsandmore Member #437
Registered: Apr 2000
|
posted 10-27-2000 09:09 PM
CS50, welcome to M&M. If you get a chance, drop by Sam's Place and introduce yourself. Sam's is where we kick back and enjoy each others company.We have a really great community of Ford lovers here, and it's a totally flame free enviroment! You might be surprised with regards to your question. We have some pretty damn good tech advisors here! On a side note, I recognize your "Project Mut" sig. Where else do you regularly post? Stewart
------------------
Got Milk? :-)~~
If you go fishing, bring a fishnet ;) you might catch a hummingbird 1990 Platinum GT (my poor baby's sheet metal has been violated!)
- Some mods, but not enough!
1996 Blue Crown Vic
- Suspension and exhaust mods, but nothing else...YET!
M&M Member #437
Blue Oval Believer, thru and true.
IP: Logged |
Capri
Pit Boss Posts: 918
From: Lyons, ILL, USA
Registered: May 99
|
posted 10-28-2000 01:38 PM
Did you accuire an EVTM yet? Usually anything wiring related would be in there. I am not familiar with what you are talking about. Is this a seperate connector from the Processor???Tony.
IP: Logged |
CapriStang50
Journeyman Posts: 12
From: cleveland, ohio, usa
Registered: Oct 2000
|
posted 10-29-2000 01:08 AM
yeah iv posted here b4 im 198092capristang... it wouldnt let me log in it sed bad password so i even clicked on the forgot password thing and put in the pw it gave me and it sed teh same thing so i made a new name hehe... and umm whats a evtm? and what im talking about is the green connector about 5 inches up the wireing harness going from the ecu on up so its 5 inches from teh ecu but its on the wiring harness... i need to know what wires go where.------------------
I OWN PROJECT MUT!
IP: Logged |
Stewart
Pit Boss Posts: 3620
From: Monterey, CA Mustangsandmore Member #437
Registered: Apr 2000
|
posted 10-29-2000 02:50 AM
Aha! I knew that looked familiar! Email Steve, see if he can help you with that problem your having with the old password.Stewart
IP: Logged |
CapriStang50
Journeyman Posts: 12
From: cleveland, ohio, usa
Registered: Oct 2000
|
posted 10-29-2000 01:18 PM
i mite do that stewart.. but i kinda like this name better hehe.------------------
I OWN PROJECT MUT!
IP: Logged |
CapriStang50
Journeyman Posts: 12
From: cleveland, ohio, usa
Registered: Oct 2000
|
posted 10-29-2000 01:42 PM
i just noticed i made a typo on the subject.... wireing up a 5.0(once was carerated) for efi "wiring up a 5.0 (that once was carberated) for Fuel injection.
IP: Logged |
Capri
Pit Boss Posts: 918
From: Lyons, ILL, USA
Registered: May 99
|
posted 10-29-2000 07:01 PM
EVTM Is Electronic and Vacuum troubleshooting Manual.This is something that will help you out a bunch. Along with a regular shop manual. Tony.
IP: Logged |
CapriStang50
Journeyman Posts: 12
From: cleveland, ohio, usa
Registered: Oct 2000
|
posted 10-29-2000 07:27 PM
sweet thanx ill try to find one of them evtm's somewhere. that should help me out alot.. thanx dude i hope its got whati need. i hope i can get this thing running b4 it starts snowing over here so i can get a cupple runs on the track b4 i put it away for winter. ------------------
I OWN PROJECT MUT!
IP: Logged |
cpmaverick
Pit Boss Posts: 590
From: Auburn, AL.
Registered: Jan 2000
|
posted 10-31-2000 01:22 PM
Yeah CapriStang, you really can't do a wiring job like you're attempting without a wiring diagram, the Ford ones are the best, you can get them at the dealer or you can check Ebay or something like that. -CP------------------
-Charlie Ping
1970 Maverick Grabber
-1987 5.0L B303 roller cam/rockers
-1968 Mustang Toploader
-1977 Lincoln Versailles 9 inch w/discs
-1980 Granada Front Discs
www.MAVERICKGRABBER.com [This message has been edited by cpmaverick (edited 10-31-2000).]
IP: Logged |
198092capristang
Journeyman Posts: 25
From: cleveland ohio usa
Registered: Jul 2000
|
posted 10-31-2000 10:21 PM
thanx ill look into taht also
IP: Logged |
67coupe
Journeyman Posts: 47
From: dallas NC usa
Registered: Nov 2000
|
posted 12-03-2000 02:37 AM
i an in the process of putting an 88 ho in a 41 ford factory wiring and all will give u more info on those extra plugs in a couple of days if u still need it i do know that plug at the ecm is for switch power and fuel pump relay not sure which one dont have diag. here right now email me if u need help still
at [email protected] good luck.
IP: Logged |
CapriStang50
Journeyman Posts: 12
From: cleveland, ohio, usa
Registered: Oct 2000
|
posted 12-18-2000 04:18 AM
yeah i still need help... i sent ya mail 67coupe. and i thank you ahead of time if this werks.------------------
I OWN PROJECT MUT!
IP: Logged |
.....More Info:
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
