Author
|
Topic: Which way is up?
|
Moneymaker Administrator Posts: 13182 From: Lyons, IL, USA Registered: May 99
|
posted 06-08-2002 10:32 AM
OK,now it's time for the age old question that starts many in argument in most heterosexual households. Which way do you install the toilet paper roll on the dispenser? So the paper pulls off the bottom (the way it is supposed to be) , or the wrong way ...so the paper pulls off the top? ------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
IP: Logged |
Fastymz Gearhead Posts: 5145 From: Reno Nv USA MEM#1240 Registered: Apr 2001
|
posted 06-08-2002 01:45 PM
No no brother 65 owner it gose over the top.SCOOP ------------------ 65 coupe,351w,C4,Big Boss 429 hood scoop,Crager SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html
IP: Logged |
johnmustang Gearhead Posts: 1727 From: Vancouver Island , British Columbia , Canada Registered: Nov 2001
|
posted 06-08-2002 02:51 PM
I am also in the 65 owner brotherhood , and , it must come over the top JOHN ------------------ 65 2+2 FASTBACK 68 COUPE 87 TAURUS WAGON 98 F150 XLT TRITON V8 4.6, 4 WHEEL DRIVE Member:Vancouver Island Mustang Association M&M #1710 MyPhotoPage MY TRUCK
IP: Logged |
mellowyellow Gearhead Posts: 4608 From: So. Fl. Registered: Aug 2000
|
posted 06-08-2002 04:12 PM
I have a woman come in to clean. It NEVER fails!!! She puts the rolls over the top!!! I have to change to underneath!!! EVERYONE knows that's the CORRECT and ONLY WAY.. Maybe some of you are one square guys-cheez!!Check your shorts!! UGHHH! One square is all you get over the top. After a night of Tall Boy Buds and Taco Bell Bean Burritos----challenge anyone to use an over the top roll!!! Maybe the "dainty dabbers" can make do with a square but..........
IP: Logged |
mellowyellow Gearhead Posts: 4608 From: So. Fl. Registered: Aug 2000
|
posted 06-08-2002 04:15 PM
I also have a 65. Come to think of it, maybe the post 68ers could be capable of doing that!! LMAO!!
IP: Logged |
fordnmerc Gearhead Posts: 196 From: Watkins Glen, NY USA Registered: Mar 2002
|
posted 06-09-2002 08:30 AM
If the roll is installed properly, you can always see what you are getting and it tears off more easily. If it is installed improperly, so that it goes up over and down behind, it is a real pain in the a$$! And who needs one more pain, especially if you have experienced a....log jam that practically needs dynamite to break loose! ------------------ David "Lean on me. I am just another dumb fence post." 1979 Ranchero GT 1990 Grand Marquis GS
IP: Logged |
Ken Gearhead Posts: 2650 From: Prospect, Ct. M&M Member No. 31 MCA Member 49299 Registered: Jun 99
|
posted 06-09-2002 05:56 PM
Over the top...toward the user !!!------------------ Conciousness - that annoying time between naps. Ken 1965 Springtime Yellow Coupe - 302GT40-4spd Edlebrock RPM Air Gap - 670cfm Holley Street Avenger and much, MUCH MORE !!! My 1965 (aka RUMBLE BEE) Photo Page 1995 5.0 Laser Red - 5spd - Coupe
IP: Logged |
SteveLaRiviere Administrator Posts: 24286 From: Saco, Maine Toys: '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Registered: May 99
|
posted 06-09-2002 07:40 PM
Can anyone tell in this photo which way it's hanging? ------------------
'70 Mustang Mach 1, '72 Mustang Sprint, '94 F-150 MCA Member # 47773 "Doubt is not a pleasant condition, but certainty is absurd." - Voltaire
IP: Logged |
Moneymaker Administrator Posts: 13182 From: Lyons, IL, USA Registered: May 99
|
posted 06-09-2002 08:01 PM
Why off the bottom of course! Just the way it is supposed to be. ------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
IP: Logged |
Ken Gearhead Posts: 2650 From: Prospect, Ct. M&M Member No. 31 MCA Member 49299 Registered: Jun 99
|
posted 06-09-2002 08:18 PM
quote: Originally posted by SteveLaRiviere: Can anyone tell in this photo which way it's hanging?
Why its not hangin' at all....its in his hands being neatly folded for usage !!! ------------------ Conciousness - that annoying time between naps. Ken 1965 Springtime Yellow Coupe - 302GT40-4spd Edlebrock RPM Air Gap - 670cfm Holley Street Avenger and much, MUCH MORE !!! My 1965 (aka RUMBLE BEE) Photo Page 1995 5.0 Laser Red - 5spd - Coupe
IP: Logged |
SteveLaRiviere Administrator Posts: 24286 From: Saco, Maine Toys: '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Registered: May 99
|
posted 06-09-2002 08:22 PM
He is quite the craftsman...------------------
'70 Mustang Mach 1, '72 Mustang Sprint, '94 F-150 MCA Member # 47773 "Doubt is not a pleasant condition, but certainty is absurd." - Voltaire
IP: Logged |
Fastymz Gearhead Posts: 5145 From: Reno Nv USA MEM#1240 Registered: Apr 2001
|
posted 06-10-2002 01:41 AM
I think you mean a crapsman. SCOOP ------------------ 65 coupe,351w,C4,Big Boss 429 hood scoop,Crager SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html
IP: Logged |
gttorinofan Gearhead Posts: 177 From: Charlevoix, mi, USA Registered: Mar 2002
|
posted 06-10-2002 02:55 PM
Heres my .02. If you hang it so it rolls off the bottom it will not come off the roll when toddlers play how fast can you make the TP roll go. If it comes off the top the rolls turns towards them and poof TP all over the place.------------------ You can never own too many cars. 68 Torino GT Fastback 75 Bronco 82 Capri 5.0
IP: Logged |
RickBook Journeyman Posts: 77 From: Houston, TX Registered: Apr 2002
|
posted 06-11-2002 12:44 AM
Guys (and Gals),There is actually a way to reslove this 'tissue issue'. Simply mount the TP Hanger Assembly on a single horizontal axis (perpindicular to the axis of the roll). A 3/8" bolt with spacer(s) and a nylon nut will do the trick. Just apply enough pressure so the roll doesn't spin freely - only when using a small amount of force. When the roll is not hanging to suit you, simply rotate the hanger 180 degrees (about the axis of the bolt) to change the angle of the dangle. Now, how many of you actually questioned me, went to your bathroom, removed the roll and tried it with just the TP roll?
Oh ye of little faith, Rick ------------------ Building 1970 Grabber, 347 EFI, AOD, 9"
[This message has been edited by RickBook (edited 06-11-2002).]
IP: Logged |
Dave Witthoeft Gearhead Posts: 1728 From: IL. Registered: Dec 2000
|
posted 06-11-2002 05:27 AM
It should be decided by whomever actualy remembers to put a new roll on! [This message has been edited by Dave Witthoeft (edited 06-11-2002).]
IP: Logged |
Moneymaker Administrator Posts: 13182 From: Lyons, IL, USA Registered: May 99
|
posted 06-11-2002 12:03 PM
Well at my house that's easy! I'M ALWAYS THE ONE WHO GETS STUCK REPLACING THE ROLL! ------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
IP: Logged |
fordnmerc Gearhead Posts: 196 From: Watkins Glen, NY USA Registered: Mar 2002
|
posted 06-11-2002 03:04 PM
Rick, Basically, a knife switch style of apparatus. Pivot at the center and the arm that the roll is mounted on swings in an arc of 180 degrees. Have it snap in place on either side. Very quick change, depending on who likes it one way and who the other. And everyone would be happy!We oughta take out a patent! But then, the argument would be about white or colored paper, perfumed or unperfumed, soft or softer tissue! Ya can't please all of the people all of the time! Unless you are out in the street throwing money! Well, even then they may get you for inciting a riot. If a lot of people will wig out over a simple soccer game.... ------------------ David "Lean on me. I am just another dumb fence post." 1979 Ranchero GT 1990 Grand Marquis GS
IP: Logged |
MLariviere Moderator Posts: 2538 From: Biddeford,Me.USA Registered: May 99
|
posted 06-11-2002 09:01 PM
Well,at my Mother-in-Law's house she INSISTS on underfeed. Over here,I prefer over the top. Therefore,it's a woman's concept to install the roll upside down. Typical,women can't fix anything around here.... [This message has been edited by MLariviere (edited 06-11-2002).]
IP: Logged |
jsracingbbf Gearhead Posts: 251 From: Batesville,MS. , U.S.A. Registered: Mar 2002
|
posted 06-11-2002 10:11 PM
Personally, I'm just happy there is some there, since I NEVER replace it. Jerry
IP: Logged |
bluestreek Gearhead Posts: 827 From: Athens,GA Registered: Jul 2001
|
posted 06-13-2002 08:56 AM
The importance is not in how you hang the roll, but how many WPWs you can get. Dan
IP: Logged |
fordnmerc Gearhead Posts: 196 From: Watkins Glen, NY USA Registered: Mar 2002
|
posted 06-13-2002 10:46 AM
WPW....Weird People Watching??? ------------------ David "Lean on me. I am just another dumb fence post." 1979 Ranchero GT 1990 Grand Marquis GS
IP: Logged |
Moneymaker Administrator Posts: 13182 From: Lyons, IL, USA Registered: May 99
|
posted 06-13-2002 12:33 PM
W-ipes P-er W-roll???? ------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
IP: Logged |
Bob Hopkins Gearhead Posts: 115 From: BRIDGEPORT NJ USA Registered: Jan 2001
|
posted 06-14-2002 12:25 PM
Whwll whay back in"63" boot camp In Uncle Sam's Air force I t was over the top and the end hseet folded at a 45* angle thete was 30 camodes two rows of 15 facing each other with 30" between them and 10" between the ones oneither side and a roll depenser on the wall and all of them better match over the top and 45* wah even in the papers they gave out first day!!!!!!
IP: Logged |
Moneymaker Administrator Posts: 13182 From: Lyons, IL, USA Registered: May 99
|
posted 06-15-2002 12:16 AM
No time for Sargents? ------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
IP: Logged |
beachbum Journeyman Posts: 71 From: Florida Registered: Oct 2001
|
posted 06-15-2002 11:02 AM
Have been married for forty years and the first thing my wife taught me was the roll always goes over the top and the first thing I taught her was to always leave the toilet seat up.
IP: Logged |
289 Rod Journeyman Posts: 63 From: Laguna Niguel, CA, USA Registered: Oct 2001
|
posted 06-15-2002 02:55 PM
IMHO, I like the Over The Top Method freely flowing TP. Last week I had some good TP, don't know the brand but man was that soft, felt like cloth not paper. My friend is in the marines. When he was in boot camp they had about 30 guys, 6 toilets with out stalls (nice and open!), and 1 minute to piss. So they would have 5 guys around each toilet all aiming for the toilet. So many fights started when someones aim was off. ------------------ '65 Mustang Black/Black Pony Interior 289 4V 4 speed Manual Weiand Dual Plane,AFR 165cc, Comp Cam Pro Magnum Rocker Arms, 3.55 Rearend, 2.5 inch exhaust with headers and loud!
IP: Logged |
Moneymaker Administrator Posts: 13182 From: Lyons, IL, USA Registered: May 99
|
posted 06-18-2002 11:01 AM
Why do the port-a-johns have such tight rollers? They absolutley won't let you get more than one sheet at a time. ------------------ Alex Denysenko Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00, '01, & '02 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Part time secret agent license #0089 Professional Manwhore The Barry of BarrysGrrl
IP: Logged |
mellowyellow Gearhead Posts: 4608 From: So. Fl. Registered: Aug 2000
|
posted 06-18-2002 12:02 PM
I thank God that have NEVER had to sit down in a porta-pot! Seems like some wise a** has whizzed all over the paper. Like the johns in a stadium at half-time!! wash basin, wall, floor!
IP: Logged |