|
Author
|
Topic: Posi? or No Posi?
|
MustangRdr68
Journeyman Posts: 62
From: Bensalem, PA, USA
Registered: Jul 2001
|
posted 10-04-2001 08:52 PM
   
im trying to figure out if i have a posi or not. Someone told me one way of doing it so i tried it. This is what i did: I jacked the car up. then i spun the one tire to the left and the one on the other side span the opposite direction. What does this mean? Thx Mike ------------------
1968 Mustang Coupe 289
IP: Logged |
chips67
Gearhead Posts: 313
From: louisville, ky, usa
Registered: Jul 2001
|
posted 10-04-2001 09:44 PM
sounds like its not a posi. do a burnout and check if there are 2 black marks, or just one. could be a burned out posi.------------------
67 coupe, 650dp and rpm intake on 5.0 with afr 165 heads, 4 speed, 4.11's.....best so far is [email protected] in 1/8 mile with 1.79 60ft. time.
IP: Logged |
mustangs68
Moderator Posts: 12340
From: Hampton,Virginia,USA 1968 Fastback & 1995 Vert MCA#39406 M&M #12
Registered: May 99
|
posted 10-04-2001 09:44 PM
Oh my God..One Wheels goin' Backwards!!!!LOL...sorry ..just had to...
sam
IP: Logged |
Rory McNeil
Gearhead Posts: 355
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 10-05-2001 01:40 AM
Looks like you are eqipped with a non posi rear, like almost every 8" I`ve ever come across. If you are looking for a 8" traction lock, they are tough to find, but I`ve seen more in Mustang 11`s than anything else. I`ve also seen 3.40 gears in Mustang 11`s, another good place to look for gears is in some early Econolines.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
