Long awaited MMR video clip - Mustangsandmore Forums

Brought to you in part by:

Mustangsandmore Forums

Ford Racing

Long awaited MMR video clip

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: Long awaited MMR video clip
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 03:09 PM Ok gang, you finally get to see MM in action. This is at SS/MA weight (3150 lbs.). Whatcha think? Click here to see it. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
SteveLaRiviere Administrator Posts: 37258 From: Saco, Maine Registered: May 99	posted 04-18-2003 03:34 PM Very cool! ------------------ '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Please remember our sponsors, Mustangs Plus, NPD, Osborn Reproductions, MyFordPerformance.com, and FordRamAir.com IP: Logged
johnmustang Gearhead Posts: 5144 From: British Columbia , Canada Registered: Nov 2001	posted 04-18-2003 03:35 PM quote: Originally posted by SteveLaRiviere: Very cool! Ditto JOHN ------------------ 65 2+2 FASTBACK 87 TAURUS WAGON 98 F150 XLT TRITON V8 4.6, 4 WHEEL DRIVE Member:Vancouver Island Mustang Association M&M #1710 MyPhotoPage MY TRUCK IP: Logged
BlueMule Gearhead Posts: 1147 From: Kent Island, MD USA Registered: Sep 2002	posted 04-18-2003 03:42 PM got wood here. ------------------ -Paul 70 Mach1 351C 79 Ranchero GT 97 Expedition XLT 5.4 00 SVT f150 Lightning 4149 of 4966 Born on: 06/26/2000 'life's tough... it's tougher if you're stupid.' IP: Logged
Tea'sGrabber Gearhead Posts: 240 From: Seattle, Wash. Registered: Feb 2003	posted 04-18-2003 03:42 PM Car sounds really crisp!!! I am amazed how hard it hooks. Must be a fun ride!!! Are you still using Jim's trans. and brake?? Is it a reverse pattern? Both core motors were junk!!! One 60 over wrong rods and crank. The other crank had spun a bearing on the #2 journal junk unless you're into welding on it? ------------------ Todd 71 Mav Grabber All orig 306 cu.in. Cast Iron heads. Carillo Rods.Best et. 10.71 @ 124 thru the mufflers. IP: Logged
65_302 Gearhead Posts: 255 From: Bixby, OK Registered: Jul 2001	posted 04-18-2003 03:59 PM Sounds and looks great! IP: Logged
capri man Gearhead Posts: 4320 From: doerun, ga. Registered: Nov 2000	posted 04-18-2003 04:02 PM alex, are you breaking the 60ft beams with your front or rear tires?? boy i cant wait to drivr e that thing when i come up there!! LOL ------------------ mike r racing is real everything else is just a game. 81 capri-7.51 @89mph 1/8 1.54 60 ft. http://prestage.com/site/site_display.asp?SiteID=141 IP: Logged
SteveLaRiviere Administrator Posts: 37258 From: Saco, Maine Registered: May 99	posted 04-18-2003 04:03 PM Do you ever get scuff marks on your rear bumper? ------------------ '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Please remember our sponsors, Mustangs Plus, NPD, Osborn Reproductions, MyFordPerformance.com, and FordRamAir.com IP: Logged
Hans olsson Gearhead Posts: 385 From: Sweden Registered: Apr 2000	posted 04-18-2003 04:06 PM I think it looks great! ------------------ Mustang Mach 1-71 351C 4V 285 HP F/Stock Aut G/Stock Aut IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 04:19 PM quote: Originally posted by Tea'sGrabber: Car sounds really crisp!!! I am amazed how hard it hooks. Must be a fun ride!!! Are you still using Jim's trans. and brake?? Is it a reverse pattern? Both core motors were junk!!! One 60 over wrong rods and crank. The other crank had spun a bearing on the #2 journal junk unless you're into welding on it? JPT C-4 Ultra-Lite, JPT 7 inch converter, JPT billet valve body and brake. Nothing but the best for the best! Did you guys hear that 2-3 shift? Best 2-3 shift in any C-4 I have ever seen. Han's, you will love your new trans. I like to weld. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Hans olsson Gearhead Posts: 385 From: Sweden Registered: Apr 2000	posted 04-18-2003 04:36 PM I am sure we did the right choice. I am really looking forward to meeting you and see MM live.How is the wheather forecast for next weekend? See you. ------------------ 71 Mach 1 351C 4V 285 HP F/Stock Aut G/Stock Aut IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 04:38 PM quote: Originally posted by Hans olsson: How is the wheather forecast for next weekend? See you. Fast, very fast! ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Hans olsson Gearhead Posts: 385 From: Sweden Registered: Apr 2000	posted 04-18-2003 04:40 PM I bet it is cool as well. ------------------ 71 Mach 1 351C 4V 285 HP F/Stock Aut G/Stock Aut IP: Logged
mustangs68 Moderator Posts: 19128 From: Hampton,Virginia,USA MCA#39406 M&M #12 Registered: May 99	posted 04-18-2003 05:17 PM Great Vid Clip!! But ALex if you lose weight will you run SS/LA again sam IP: Logged
N266fords Gearhead Posts: 1039 From: Spokane ,WA USA Registered: Apr 2003	posted 04-18-2003 05:19 PM Really cool what are you runing for leaf and trac bars i need knew leaf springs i thought 5 leaf no rev eye and my south side machine bars IP: Logged
mustangboy Gearhead Posts: 717 From: Ont, Canada Registered: Mar 2002	posted 04-18-2003 05:27 PM Awesome ------------------ 1968 mustang j-code sprint.13.69@101 306cu.in, stock ported heads,weiand exellerator,650 holley DP,hedman hedders,comp 292 Magnum cam,4-speed,8 inch 4.11 detroit locker http://mustangsandmore.50megs.com/MembersPics/mustangboy.html IP: Logged
Fastymz Moderator Posts: 14201 From: Reno Nv USA MEM#1240 Registered: Apr 2001	posted 04-18-2003 05:34 PM WOW thats awesome Alex,I watched it at least 20 times. Your lucky to keep the rear tires on the ground. ------------------ SCOOP oddly obsessed with big scoops on little Mustangs 2.26 60'S 14.9 @ 90.86MPH 65 coupe,351w,C4,Big Boss 429 hood scoop,8"3.40 TracLoc,Cragar SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html IP: Logged
kid vishus Gearhead Posts: 5248 From: middle of NC Registered: Oct 2000	posted 04-18-2003 05:47 PM And it's more impressive to watch in person. IP: Logged
clevelandstyle Gearhead Posts: 800 From: Connersville, IN Registered: Jul 2001	posted 04-18-2003 05:48 PM I like it. I'm gonna have to get out to see you run some time. ------------------ Ben Grabber Green '70 Mach I 351C 4V Robbin Egg Blue '79 Fairmont 351C 4V IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 05:58 PM quote: Originally posted by capri man: alex, are you breaking the 60ft beams with your front or rear tires?? It will break the 60 foot clocks on the rears if I launch about 200 RPM higher. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Ken Gearhead Posts: 4350 From: Prospect, Ct. M&M Member No. 31 MCA Member 49299 Registered: Jun 99	posted 04-18-2003 06:49 PM WOW, that sorta reminds me of my launch last year at ATCO Raceway....oh, no wait....Thats right, I didn't have my car there ?!?!? Awesome display Alex !!! ------------------ Conciousness - that annoying time between naps. Ken 1965 Springtime Yellow Coupe - 302GT40-4spd Edlebrock RPM Air Gap - 670cfm Holley Street Avenger Roller Cam - Duration 282'/282' @ 050 220'/220' lift 0.512 and much, MUCH MORE !!! My 1965 (aka RUMBLE BEE) Photo Page 1995 5.0 Laser Red - 5spd - Coupe IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 07:13 PM quote: Originally posted by N266fords: Really cool what are you runing for leaf and trac bars i need knew leaf springs i thought 5 leaf no rev eye and my south side machine bars Fiber glass parabolic mono leaf springs. We sell them. 7 lbs each. If you didn't get the SSM bars already then don't. Cal-Tracs are a much better proposition. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
bfxcomet Gearhead Posts: 617 From: Port Alberni, B.C. , Canada Registered: Mar 2001	posted 04-18-2003 07:22 PM I was unable to watch the video , what type of player format did you use Steve? ------------------ 65 comet project 84 T-bird 302/C4 14sec street/strip Made in CANADA built for speed #1145 IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 07:33 PM We had trouble with the AOL media player so we disabled it and use the Microsoft Windows media player Roger. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
rockafellz Gearhead Posts: 1348 From: San Lorenzo, CA, USA Registered: Aug 2001	posted 04-18-2003 07:44 PM DROOOOOOOOL Very cool Alex!! That think hooks like a bass on a worm!! Erik ------------------ 1966 Ford Mustang 2+2 Mine - Restomod in Progress 1966 Ford Mustang Coupe Dad's - Original Unrestored IP: Logged
RobsRestoMod Journeyman Posts: 29 From: Spring, Texas Registered: Jun 99	posted 04-18-2003 08:18 PM Very Cool!!!!! IP: Logged
fastford34 Gearhead Posts: 552 From: penna Registered: May 2002	posted 04-18-2003 08:31 PM AWESOME! would you care to trade motor for motor? ------------------ 34 coupe powered by 351 c 4v keith IP: Logged
jsracingbbf Gearhead Posts: 2160 From: Batesville,MS. , U.S.A. Registered: Mar 2002	posted 04-18-2003 08:46 PM SWEET! ------------------ Jerry 69 Mustang Pro ET Drag 70 Mustang retired former footbrake car Jimmy: ( S-10 driver/friend ) Hey Jer how do you like my flames I painted on the old Bowtie? Jerry: Nice but you didn't have to do that, if you ever get it going fast enough at the strip it'll catch fire. IP: Logged
V8 Thumper Gearhead Posts: 4044 From: Orange, Ca. United States of America Registered: Dec 2001	posted 04-18-2003 09:55 PM Damn it I've got problems with Media Player I'll have to check it out on my PC at work ------------------ 1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle http://mustangsandmore.50megs.com/V8Thumper.html IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-18-2003 10:09 PM Use the Microsoft one Todd. Our AOL crap media player is hit or miss also. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
V8 Thumper Gearhead Posts: 4044 From: Orange, Ca. United States of America Registered: Dec 2001	posted 04-18-2003 10:32 PM Oh yea ------------------ 1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle http://mustangsandmore.50megs.com/V8Thumper.html IP: Logged
BarrysGrrl Gearhead Posts: 1604 From: Illinois/Indiana & parts inbetween Registered: Jan 2002	posted 04-18-2003 11:49 PM As I learn my new camera, it's capabilities, and the software . . . WATCH OUT! You're gonna see more of MM than you ever wanted to! That camera was the best investment I have ever made. It is highly recommended! Minolta S404. Hope you all have enjoyed the pics! ------------------ Beth Head Cheerleader for Moneymaker Racing! "My best friend is the one who brings out the best in me." - Henry Ford (for Alex) Alex & Beth's Homepage MoneymakerRacing.com IP: Logged
Dubz Gearhead Posts: 1048 From: Manitoba Canada Registered: Oct 2002	posted 04-19-2003 02:35 AM , VERY IP: Logged
popeye Gearhead Posts: 124 From: midwest USA Registered: Dec 2002	posted 04-19-2003 02:40 AM impressive!!gotta get a set those fiberglass springs ------------------ This is FORD COUNTRY, where on a quiet night, you can here a chevy rusting IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-19-2003 09:41 AM quote: Originally posted by popeye: impressive!!gotta get a set those fiberglass springs We sell them. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
lilgtgirl Gearhead Posts: 112 From: usa Registered: Jan 2002	posted 04-19-2003 02:10 PM wow! that was good. how about moneymaker racing teaching me how to launch like that? i think i'm about 4 or 5 hours away! hehehe IP: Logged
69maverick Moderator Posts: 1137 From: Thomaston,CT. Registered: Jan 2001	posted 04-19-2003 11:48 PM IP: Logged
steve'66 Gearhead Posts: 7226 From: Sonoma,CA,USA Registered: Mar 2000	posted 04-19-2003 11:55 PM Alex, Your car launches awesome! Very cool, I used to think that it just popped the front end up for a half second or so. It really pulls it up and keeps it up! Very cool stuff! SteveW [This message has been edited by steve'66 (edited 04-19-2003).] IP: Logged
KJ JONES Racing Journeyman Posts: 9 From: Reseda, CA, USA Registered: Apr 2003	posted 04-21-2003 05:52 PM You're my hero, Denysenko! Hahahahaha! Nice launch shot and pass footage. Cool. Hope you guys are both doing OK. All's great in Cali, as per usual. Did you see the pics of the new buggy comin' together? http://members6.clubphoto.com/kj528520/1243163/guest.phtml Slow, steady progress. You know how that is! I think Wardie is headed up to Sacto for points. Wasn't gonna go, but I guess plans change pretty easily when it comes to goin' racin'. You guys take care. Nice footage of the car! Kaje KJ JONES Racing Reseda, CA www.kjjones.com IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-21-2003 09:30 PM 'bout time you showed up around here KJ! Welcome to M&M ! ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Dusty Kiser Gearhead Posts: 127 From: Bethel,Oh USA Registered: Mar 2002	posted 04-22-2003 09:03 PM Bad to the bone Alex. Sent it to everyone I have an address for. By the way, my friend John is switching to a C4 and needs some advice. Is Jim's phone # still 517-663-0578? IP: Logged
Moneymaker Administrator Posts: 21725 From: Lyons, IL, USA Registered: May 99	posted 04-22-2003 11:47 PM Yes Dusty. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged