Indiana Denysenko and the Quest for Holy Horsepower.....Pics too!

Brought to you in part by:

Mustangsandmore Forums

Ford Racing

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Indiana Denysenko and the Quest for Holy Horsepower.....Pics too!
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:02 AM OK, since you all have heard me talk about the place I thought that it's high time you got to see some of the stuff that goes on behind the hallowed halls of the double secret skunk works in Arkadelphia Arkansas (I know...WHERE?????) Here we are unloading Tony's FI bullit in the dissassembly room. That's Tony, with Dave and Kelly, two of the machinests at Kuntz & Co. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:05 AM Here is an R-302 FRPP block fully machined with all the trick stuff including rollerized cam bearings and ready for assembly. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:08 AM Hard to believe that these two are actually kissin' cousin's isn't it? That bad a$$ dude just won two D.I.R.T. events in a row and is in for a look see. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:11 AM Here is one of #66 Bill Frye's championship dirt motors. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:13 AM How about "up close and personal" with a new Dart block being presision bored? ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:16 AM Newest FE project. How about a BDS blown and injected, aluminum headed 427 stroker? ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:21 AM Last one for tonight. See if you all can guess what's sitting on the dyno getting ready for a pull in this pic? ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Fastymz Moderator Posts: 20708 From: Reno Nv USA M&M#1240 Registered: Apr 2001	posted 02-05-2003 12:42 AM The last one must be your baby on there.Thats at least a 3" spacer on there.And those valve covers are real different looking too. ------------------ SCOOP oddly obsessed with big scoops on little Mustangs 2.26 60'S 14.9 @ 90.86MPH 65 coupe,351w,C4,Big Boss 429 hood scoop,8"3.40 TracLoc,Cragar SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html IP: Logged
two89w Gearhead Posts: 316 From: sydney australia Registered: Sep 2002	posted 02-05-2003 02:06 AM lets all bow to the all mighty god IP: Logged
ccode67 Gearhead Posts: 2895 From: douglasville,ga,usa Registered: Mar 2001	posted 02-05-2003 07:26 AM Okay Alex, don't be so secretive, tell me some #'s. HP? Torque? We need to know. ------------------ Stuart MCA #48902 M&M #1091 67 stang 5 speed, 351W, Edelbrock Performer RPM package my photo page IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 09:38 AM I'd tell you the HP and torque but then I'd have to kill you all! ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 09:48 AM Here is a ported Edelbrock FE head getting the finishing touches. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 09:52 AM Edelbrock Victor small block head prepped for a NMRA Hot Street competitor. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com [This message has been edited by Moneymaker (edited 02-05-2003).] IP: Logged
ccode67 Gearhead Posts: 2895 From: douglasville,ga,usa Registered: Mar 2001	posted 02-05-2003 09:54 AM quote: Originally posted by Moneymaker: I'd tell you the HP and torque but then I'd have to kill you all! Just give us a hint.....over 271hp I'm sure.... IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 09:56 AM Hell, it's over 471 lol ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
SteveLaRiviere Administrator Posts: 44935 From: Saco, Maine Registered: May 99	posted 02-05-2003 10:10 AM I thought it was Illinois Denysenko? ------------------ '70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Please remember our sponsors, Mustangs Plus, NPD, Osborn Reproductions, MyFordPerformance.com, and FordRamAir.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 10:18 AM Yeah it is Steve, but Indiana sounds better. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
kid vishus Gearhead Posts: 6405 From: middle of NC Registered: Oct 2000	posted 02-05-2003 10:47 AM Very Cool! I didn't know Kuntz built Bill Frye's motors. But I guess I have been away from teat scene awhile now. IP: Logged
ccode67 Gearhead Posts: 2895 From: douglasville,ga,usa Registered: Mar 2001	posted 02-05-2003 10:48 AM quote: Originally posted by Moneymaker: Hell, it's over 471 lol I knew I could trick you into spillin' the beans. IP: Logged
Hans olsson Gearhead Posts: 718 From: Sweden Registered: Apr 2000	posted 02-05-2003 12:31 PM My guess on the dyno motor is "The 289 from hell". And i have actually been in Arkadelphia Arkansas. ------------------ 71 Mach1 351c E/SA 11.89-110 mph F/SA 11.76-111 mph IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:54 PM Since Kuntz and Frye have hooked up Rob, they have not looked back. They put FoMoCo on the D.I.R.T. map. You didn't trick me into anything Ccode. Yes Hans, it just may very well be the new 289 from HELL! We'll just have to see how it goes down the track. What the heck were you doing in Arkadelphia anyway? Visiting KK or K&C? ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:55 PM The engine assembly room where very few even get to set foot. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 12:58 PM The place where power is created. The cylinder head room. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com [This message has been edited by Moneymaker (edited 02-05-2003).] IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 01:02 PM Checking for leaks. Tony giving things a once over after a warm up pull. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com [This message has been edited by Moneymaker (edited 02-05-2003).] IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 01:04 PM The man himself Jim Kuntz checking water temp after warm up prior to a power pull. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 01:06 PM The 289 from HELL up close and personal. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 01:08 PM Dyno control. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 01:11 PM Jim Kuntz at the controls letting the 289 sing! The whole shop stoped to come watch and listen to this one. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 01:13 PM Larry and Clarence, two of the best kept behind the scenes secrets at Kuntz & Co. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
JCQuinn@work Gearhead Posts: 899 From: Lakewood, CO, USA Registered: Jun 2001	posted 02-05-2003 01:26 PM Thanks for the tour. They'd have to shoot me to get me to leave that place. I think it is very close to what heaven must be like. John IP: Logged
Hans olsson Gearhead Posts: 718 From: Sweden Registered: Apr 2000	posted 02-05-2003 01:38 PM We visited Keith Craft and picked up some new parts for our 351C. We were there a few months ago.It rained like hell.Aside from that it was a nice experience. ------------------ 71 Mach1 351c E/SA 11.89-110 mph F/SA 11.76-111 mph IP: Logged
Fastymz Moderator Posts: 20708 From: Reno Nv USA M&M#1240 Registered: Apr 2001	posted 02-05-2003 03:29 PM That was real cool Alex thanks for sharing. You run a choke on your carb? ------------------ SCOOP oddly obsessed with big scoops on little Mustangs 2.26 60'S 14.9 @ 90.86MPH 65 coupe,351w,C4,Big Boss 429 hood scoop,8"3.40 TracLoc,Cragar SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 03:40 PM quote: Originally posted by Fastymz: You run a choke on your carb? Yeah Scoop, we must have a choke on an original carb as per the NHRA/IHRA Superstock rules. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
capri man Gearhead Posts: 7249 From: doerun, ga. Registered: Nov 2000	posted 02-05-2003 03:47 PM thanks for the tour. that was neat. ------------------ mike r racing is real everything else is just a game. 81 capri-7.51 @89mph 1/8 1.54 60 ft. http://prestage.com/site/site_display.asp?SiteID=141 IP: Logged
Stephen & Horace Johnson Gearhead Posts: 228 From: Gadsden, AL Registered: Jul 2002	posted 02-05-2003 04:26 PM Hey Alex very good topic.. I guess you are making good HP with that gang.. You know im goin to ask this.. I have too.. Who's 427 heads are those...lol.. Come on man.. ------------------ Stephen Johnson #2162 Horace Johnson #2167 NHRA-IHRA SS/D 427 Ford Fairlane (Ex-Van Cleve) 1985 Mustang FFW True Street 11.86 @115mph (N/A) IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 05:12 PM quote: Originally posted by Stephen & Horace Johnson: Who's 427 heads are those...lol.. Come on man.. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
bluestreek Gearhead Posts: 1724 From: Athens,GA Registered: Jul 2001	posted 02-05-2003 05:28 PM Thanks Alex. Those are some mouth watering picures. Better than beer and peanuts! ------------------ 1966 Mustang Coupe: Custom glass hood and BIG scoop sits atop a 289 stroked to 331 c.i., Steel crank and girdle, 5.4 H-beams, Forged slugs, ported TFS alum. heads, ported Stealth 8020 intake, CompCams Xtreme Solid Roller, Holley 750 HP, long tubes, 4speed, 9" 3.50 posi, BFG Drag radials.. IP: Logged
kid vishus Gearhead Posts: 6405 From: middle of NC Registered: Oct 2000	posted 02-05-2003 05:53 PM Isn't that a pic of Les Baer's car on the office wall. IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 06:20 PM Yup Rob, among several others. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
kid vishus Gearhead Posts: 6405 From: middle of NC Registered: Oct 2000	posted 02-05-2003 07:06 PM quote: Originally posted by Moneymaker: Yup Rob, among several others. And that kinda looks like Moneymaker at the top above the grey-doored switchbox. IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-05-2003 10:34 PM ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
futurattraction Gearhead Posts: 108 From: Iowa City, IA Registered: Oct 2001	posted 02-05-2003 11:14 PM Thanks for the look-see Alex. Very impressive. That's probably the closest to Jim Kuntz I'll ever get... IP: Logged
lawless Gearhead Posts: 487 From: Richmond, VA Registered: Aug 2000	posted 02-05-2003 11:45 PM The next time there is a field trip, do ya think we can just load up the big yeller school bus and go with you??? ------------------ 64 Fairlane Hard top 289 4-speed -- SOLD to a good home. IP: Logged
Buster Gearhead Posts: 1553 From: Hurricane alley Registered: May 2002	posted 02-05-2003 11:45 PM hummm IP: Logged
Stephen & Horace Johnson Gearhead Posts: 228 From: Gadsden, AL Registered: Jul 2002	posted 02-06-2003 12:19 AM Thanx Alex.. ole good buddy of mine..lol ------------------ Stephen Johnson #2162 Horace Johnson #2167 NHRA-IHRA SS/D 427 Ford Fairlane (Ex-Van Cleve) 1985 Mustang FFW True Street 11.86 @115mph (N/A) IP: Logged
Fastymz Moderator Posts: 20708 From: Reno Nv USA M&M#1240 Registered: Apr 2001	posted 02-06-2003 01:23 AM quote: Originally posted by lawless: The next time there is a field trip, do ya think we can just load up the big yeller school bus and go with you??? COOL I'll bring the beer. ------------------ SCOOP oddly obsessed with big scoops on little Mustangs 2.26 60'S 14.9 @ 90.86MPH 65 coupe,351w,C4,Big Boss 429 hood scoop,8"3.40 TracLoc,Cragar SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html IP: Logged
Dubz Gearhead Posts: 1890 From: Manitoba Canada Registered: Oct 2002	posted 02-06-2003 01:46 AM I'LL bring the beer, canadians have better beer anyways :P IP: Logged
TomP Gearhead Posts: 6007 From: Delta BC Canada Registered: Dec 99	posted 02-06-2003 02:08 AM Swing that school bus past here, i'm hopping on board and not just for the beer! That looks like a cool place . Those exhaust ports in the Edelbrock FE head are HUGE, Pro Nostalgia car and a Galaxie too i'm guessing since not many others would benefit from that exhaust port. IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-06-2003 10:44 AM You'd be surprised Tomp. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
MrXerox Gearhead Posts: 348 From: Oklahoma City, Oklahoma Registered: Nov 2000	posted 02-06-2003 06:06 PM I just noticed the secret to your 289...He used that Mountain Dew sitting on the dyno desk as fuel additive huh?! IP: Logged
Moneymaker Administrator Posts: 26813 From: Lyons, IL, USA Registered: May 99	posted 02-11-2003 11:54 AM By the way, we did get the wheels turning for a possible venture into NMRA Hot Street. It's a VERY distinct possibility for 2004. We are leaning towards a 363 inch deal to take advantage of the weight. MM could (would) possibly be the lightest car in the class. A lot is still up in the air at this point, but we are talking about it. Just an FYI ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver MCA member# 53321 NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 Professional Manwhore The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked." Quote #2: "Make sure brain is in gear before engaging mouth!" Quote #3: "If you can't run with the big dogs, stay on the porch!" www.moneymakerracing.com IP: Logged
dubstar Gearhead Posts: 423 From: Long Beach, Ca 1966 A-Code Coupe Registered: Feb 2002	posted 02-11-2003 12:25 PM very nice. ------------------ Alan 1966 Tahoe Turquoise A-Code Coupe 650cfm Holley 4bbl / petronix ignition / missing valance / sanded to bare metal IP: Logged
Randy S Journeyman Posts: 29 From: WI Registered: Jan 2003	posted 02-11-2003 08:57 PM Alex, Thanks for the cool post with the photos. I guess you could call them the Ford House of Horsepower. They've been building record holding motors as long as I can remember. On your possible NMRA venture, will the car you use be your '89 convertible or something else??? Trouble is I think Beth will kick your butt if you do that to "her" car.......unless she gets to run it with the 362. Randy IP: Logged
V8 Thumper Gearhead Posts: 4652 From: Phoenix, Arizona Registered: Dec 2001	posted 02-11-2003 10:56 PM Wow Alex, that's some good stuff I learned a thing or two just looking at the pics ------------------ 1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle http://mustangsandmore.50megs.com/V8Thumper.html IP: Logged