|
Author
|
Topic: please help me choose a cam
|
THUMPING COUGAR
Journeyman Posts: 30
From:
Registered: Mar 2001
|
posted 11-25-2001 08:28 PM
   
i dont know what type of cam i should put in my 351w, i want a cam with a very rough idle but at the same time a cam that will give me plenty of horsepower, i am planning on having intake, carb, have not chosen which brand yet, hedman headers,gt-40 heads,and race mufflers which cam is right fo me please help
IP: Logged |
GTS Racing
Journeyman Posts: 18
From: Thor, Iowa 50591
Registered: Dec 2000
|
posted 11-25-2001 10:21 PM
Hey, THUMPING COUGAR. We have a windsor, with keith black domed pistons. It has mild ported GT-40 heads small valves, torker II intake, 750cfm double pumper. We use elgin solid cam, with .536i and .560e lift and the duration is 248i 258e @ .050. It is in an 1984 mustang that is race only. It has run the best of 7.17 @ 94 mph. In the heat the first time down the quater mile it ran 11.66 @ 114mph. This combo has worked very well for us. The desk top dyno said about 450HP.
Take the desk top dyno for what is worth.
Just thought you would like to know what we did with our windsor. All under $3000.
IP: Logged |
Moneymaker
Administrator Posts: 10037
From: Lyons, IL, USA
Registered: May 99
|
posted 11-26-2001 02:49 PM
270 S Comp!  ------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link
IP: Logged | |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
