|
Author
|
Topic: 91 5 spd
|
Velocity0
Gearhead Posts: 156
From: Burnaby, BC Canada
Registered: Apr 2001
|
posted 08-16-2001 09:23 PM
   
Hey guys.
are there any limitations to what block a 91 5 spd would match up with?I found one for $400 that I want to buy,
but I haven't bought my engine yet.
I plan to buy a 79 to 93 5.0
it would definately line up with one of those right?
------------------
Tyler
1980 Mustang HB
2.3L Baby Stang
Soon to be 302
IP: Logged |
steve'66
Gearhead Posts: 2791
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 08-16-2001 11:36 PM
Right,Just get the bellhousing with the tranny. You might have some clutch adaptions to do depending on what car it's going in. SteveW
IP: Logged |
Velocity0
Gearhead Posts: 156
From: Burnaby, BC Canada
Registered: Apr 2001
|
posted 08-16-2001 11:39 PM
Clutch adpatations?like what?
It's going into a 1980 Mustang. From what I can tell from the housings I'e seen, the clutch is a direct thing..
I use a cable clutch.
------------------
Tyler
1980 Mustang HB
2.3L Baby Stang
Soon to be 302
IP: Logged |
steve'66
Gearhead Posts: 2791
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 08-17-2001 12:17 AM
Tyler,Then you should be fine.
Enjoy, SteveW
IP: Logged |
Gearhead
Gearhead Posts: 1044
From: Look up... waaaaay up!! No, no, no... not that far.
Registered: Mar 2000
|
posted 08-17-2001 12:38 PM
Tyler, take a look at my T-5 swap page on my website at http://79indypace.stangnet.com/swap.htmIf it's from a 5.0 Mustang then you are fine. Everything bolts right up. It's probably one of the easiest swaps you will ever find! ------------------
Cheers,
Ian
M&M Member #395
-------------------
'79 Mustang Indy 500 Pace Car
Ian's Pace Car Website
Vancouver Island Mustang Association Website
Indy Pace Car Registry of Mustangs Official Website "If you get to thinking you are someone of some importance and influence, just try ordering another persons dog around." - Author Unknown
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
