|
Author
|
Topic: 11 to 1 289-302 pop up pistons NEW
|
Moneymaker
Administrator Posts: 9936
From: Lyons, IL, USA
Registered: May 99
|
posted 12-06-2001 12:09 PM
   
Matched and balanced sets of Badger 11 to 1 pop up pistons and pins for 289 or 302 FoMoCo new in box. Available in .030 and .060 oversize. Standard ring groves. Always in stock. $150 per set for M&M members only.------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link [This message has been edited by Moneymaker (edited 12-06-2001).]
IP: Logged |
capri man
Gearhead Posts: 907
From: doerun, ga.
Registered: Nov 2000
|
posted 12-06-2001 12:12 PM
alex what would i have to do to use them with my p-heads and e-cam?
also check your mail.------------------
mike r
racing is real
everything else is just a game.
81 capri-7.56 @88mph 1/8
1.56 60 ft.
IP: Logged |
Moneymaker
Administrator Posts: 9936
From: Lyons, IL, USA
Registered: May 99
|
posted 12-06-2001 12:16 PM
Nothing but install them Mike.  They will work just fine and have plenty of valve clearance. I will be checking my mail in one hour or so.  ------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link
IP: Logged |
69maverick
Gearhead Posts: 584
From: Thomaston,CT.
Registered: Jan 2001
|
posted 12-06-2001 02:13 PM
Alex I'm getting my heads done right now there c90e s angle milled at 10 degrees about .022 this puts them about 51cc would these pistons work? Stock pistons put me at 9.9 to 1 The comp cam has .499 lift[This message has been edited by 69maverick (edited 12-06-2001).]
IP: Logged |
Moneymaker
Administrator Posts: 9936
From: Lyons, IL, USA
Registered: May 99
|
posted 12-06-2001 02:16 PM
With 48 cc's the pistons will give 11 to 1 compression. 51 cc's should generate approximatly 10.5 to 1. ------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link
IP: Logged |
H8CHEVY
Gearhead Posts: 147
From: Southern Cali
Registered: Jun 2000
|
posted 12-06-2001 03:42 PM
Alex, would that mean on the edelbrock rpm aluminum heads that the compression ratio would be even lower than the 10.5 to 1??? thanks..
IP: Logged |
Moneymaker
Administrator Posts: 9936
From: Lyons, IL, USA
Registered: May 99
|
posted 12-06-2001 04:02 PM
49.2 cc = 11.6 to 1.
54.5 cc = 10.7 to 1.
67 cc = 9.0 to 1.
------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link
IP: Logged |
Moneymaker
Administrator Posts: 9936
From: Lyons, IL, USA
Registered: May 99
|
posted 12-07-2001 11:01 AM
By the way, these are the ame pistons that we use in the 300+ HP 289/302 build up. Check out some piston prices esleware for high compression units for comparision. ------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
