|
Author
|
Topic: wanted: 4spd toploader
|
ksurob
Journeyman Posts: 8
From:
Registered: Jun 2001
|
posted 06-15-2001 07:42 AM
   
Does anyone out there have one the want to let go of? I want to convert my 65 fastback from a 3spd auto to 4spd man. I will also need a bellhousing if you have that too.
IP: Logged |
shoe
Journeyman Posts: 16
From:
Registered: Feb 2001
|
posted 06-15-2001 02:17 PM
I don't have a 4-speed for you ,but I do have a bellhousing set up if you don't find one .Thanks, Bob
IP: Logged |
Ryan Wilke
Gearhead Posts: 308
From: Stanton, MI
Registered: Oct 2000
|
posted 06-16-2001 10:56 AM
I've got a fresh close-ratio 4-speed looking for a home. It's has the 10-spline, 1 1/16" dia. input shaft. Tag #RUG-AW. It was OEM for '70 Mustang 302/351s. I'm asking $500.
IP: Logged |
ksurob
Journeyman Posts: 8
From:
Registered: Jun 2001
|
posted 06-18-2001 08:45 AM
Is this a t-10 then? A 4spd toploader is what I'm looking for but I'm considering t-10's too. thanks for replying! =) quote:
Originally posted by Ryan Wilke:
I've got a fresh close-ratio 4-speed looking for a home. It's has the 10-spline, 1 1/16" dia. input shaft. Tag #RUG-AW. It was OEM for '70 Mustang 302/351s. I'm asking $500.
IP: Logged |
ksurob
Journeyman Posts: 8
From:
Registered: Jun 2001
|
posted 06-18-2001 08:47 AM
Hi Bob! thanks for replying. I'll let ya know. No one has come back witha toploader yet but there seem to be some t-10s. Will the same bellhousing work? quote:
Originally posted by shoe:
I don't have a 4-speed for you ,but I do have a bellhousing set up if you don't find one .Thanks, Bob
[This message has been edited by ksurob (edited 06-18-2001).]
IP: Logged |
steve'66
Gearhead Posts: 2292
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-18-2001 10:54 AM
quote:
Originally posted by ksurob:
Is this a t-10 then? A 4spd toploader is what I'm looking for but I'm considering t-10's too. thanks for replying! =)
Ryans tranny is a toploader. 
IP: Logged |
Ryan Wilke
Gearhead Posts: 308
From: Stanton, MI
Registered: Oct 2000
|
posted 06-19-2001 01:57 PM
Yep, it sure is.......... I'm thinking a T-10 would go for less $$ than a Toploader.
Ryan 
IP: Logged |
70spoiler
Journeyman Posts: 19
From: stillwater, MN
Registered: Mar 2001
|
posted 06-20-2001 12:25 AM
I have a toploader, with everything you would need for your swap. shifter, bellhousing, flywheel, pedals with all mounts, complete linkage, etc. I basicly have 2 complete cars im parting out plus lots of extras.------------------
70 cyclone spoiler 429CJ(472HP, 542f/lb), 850 holley, mallory,weiand stealth, sharp rollers... 4sp, centerforce, comp orange and black, Weld draglites
99 F250SD 4X4 PSD
89 SHO 5sp(beater) [This message has been edited by 70spoiler (edited 06-20-2001).]
IP: Logged |
ksurob
Journeyman Posts: 8
From:
Registered: Jun 2001
|
posted 06-20-2001 09:08 AM
how much are you asking? I'm not really interested at this time. I sort'f already have a tranny but not the hardware to go with it. At the time I posted my father wasn't even going to consider letting me have the one he has. Dad doesn't like it when I spend my hard earned bucks, he's always harping on saving money. Like that can be done when you have a mustang for a moneypit, right? Anyway when he heard I had given up on getting his (cause he's saving it for that big future hot rod project he's been talking about for years, that doesn't exist yet) and was about to fork out some dough for another one he recanted and is hinting on my mustang being the hot rod project. We'll see. but since you have all the gear it'd certainly save me the trouble of getting it later. So how much are you asking? What car is this out of and off of what motor?
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
