NVMP Journeyman Posts: 8 From: Windham, Maine Registered: Oct 2000
|
posted 05-13-2001 03:14 PM
When I purchased my '67 I brought it home as a basket case. I also purchased a '67 Coupe as a donor car. The people who originally owned the FB aquired a lot of spare parts for the resto. I have pretty much everything that I need to complete the FB resto. So I am selling a lot of the spares. All of the stuff listed is for a '67. If it is specific to Coupe or FB I'll specify. Also, all of these parts are straight off the cars they came from and haven't been reconditioned, but are good solid pieces, unless specified otherwise. Photos of all parts are available upon request.1 pair tail light assembly (buckets, lenses, rubber surround) $50/pair 1 radio bezel for non-lower console $20 2 sets of shock tower braces $20/pair 1 complete instrument panel. The bottoms of the bezel are broken where it would bolt to dash. But this is complete with all instruments, lenses, housing and brushed alum. insert. $50 2 289ci air cleaner assemblies. 1 without a lid. $100/$50 1 pair of deluxe door panels with alum. insert. 1 has a torn armrest. $100 1 set rear leaf spring $40/pair 1 upper console for Coupe $200 1 complete front end assembly including upper/lower control arms, spindles, drums, spring perches, strut rods. $200/side 1 set of interior quarter panels for Coupe, black. $75/pair 2 front sway bars with brackets. $40/each 1 clutch pedal assembly with bracket and brake pedal. $75 1 rear upper/lower seat. The upolstry is rough and foam is rough but the frame is useable. $25 for both 1 steering box w/ integral shaft (16:1 I believe) $50 1 complete set (4) of '67 rear quarter ornaments (faux vents) $50 for all 4 1 steering shaft tube $20 1 pair front bucket seats semi complete. 1 has torn upolstry. $100 2 67 "Running Horse" steering wheel centers $30 each 1 under-dash heater box assembly $50 1 FB rear deck lid. Rusty corner. $150 1 pair hood hinges $40/pair 1 pair of front fenders. Great shape $300/pair 1 fuel tank $50 1 hood w/out indicators, drilled for hood pins. $250 You can email me at [email protected] Nathan Varney
IP: Logged |