|
Author
|
Topic: How to get the window all the way down?.
|
mustangboy
Gearhead Posts: 670
From: Ont, Canada
Registered: Mar 2002
|
posted 11-08-2002 11:44 PM
  
Hope someone can help me.I need to get the window felts out of a 66 coupe.On my 68 there was a bolt I removed in the rear of the door and a rubber stopper on the bottom of the door that the window sat on. After I removed these the window would roll down further than normal allowing access to the felts.I found and removed this rubber on the 66 but it still won't go down beyond where it normally sits.I removed a couple of bolts in the back of the door but no luck.
IP: Logged |
Scott (69Mach)
Gearhead Posts: 502
From: Walnut Creek, CA USA
Registered: Jun 99
|
posted 11-09-2002 07:38 PM
Don't know for sure, butt I'd pop the door panel and loosen up the assmebly. That should get it down low enough.
IP: Logged |
SteveLaRiviere
Administrator Posts: 33988
From: Saco, Maine
Registered: May 99
|
posted 11-09-2002 09:07 PM
You must have missed a stop. That's why I like using shop manuals, I never have to wonder. ------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
IP: Logged |
mustangboy
Gearhead Posts: 670
From: Ont, Canada
Registered: Mar 2002
|
posted 11-10-2002 03:33 PM
I've already got the door pad off,the window looks like its all the way down but it can't be.Surely somebody has done this before 
IP: Logged |
I65Stang
Gearhead Posts: 5950
From: Antelope, CA
Registered: Jun 99
|
posted 11-10-2002 04:51 PM
Unless someone knows of a trick I dont, you cant get the window down any further  . Yeah, major pita to do window felts (window partially up).------------------
Tim M&M Member #35
1965 Mustang coupe, 200 I6, Holley 2300, Clifford header, true duals w/ 26" Smithys
1988 Mustang GT AOD vert, 15.810 @ 88.871 mph 100% stock w/ no traction
https://mustangsandmore.com/ubb/I65Stang.html
IP: Logged |
Fastymz
Moderator Posts: 12015
From: Reno Nv USA MEM#1240
Registered: Apr 2001
|
posted 11-10-2002 05:22 PM
I'll have to look at my shop manual when I get home.
But I think you have to take the glass out of the door,to change the felt.You can leave the window in but then it's in the way.
And I could be wrong about this.SCOOP ------------------
oddly obsessed with big scoops on little Mustangs 2.26 60'S
14.9 @ 90.86MPH 65 coupe,351w,C4,Big Boss 429 hood scoop,8"3.40 TracLoc,Cragar SS,Black Suede. https://mustangsandmore.com/ubb/Fastymz.html
IP: Logged |
mustangboy
Gearhead Posts: 670
From: Ont, Canada
Registered: Mar 2002
|
posted 11-10-2002 10:35 PM
Thanks guys.I found the bolts,one stops the travel of the window regualator.Once I loosened the bolt and removed the rubber from inside the bottom of the door the glass will roll down inside the door and leave the felts exposed so you can remove and replace them 
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
