Brought to you in part by:
Topic: Remote starter ??
From: Reno Nv USA MEM#1240
Registered: Apr 2001
posted 11-06-2002 01:21 AM
I'm going to try and do a compression test on motor.Why I hook up the remote starter do I have to disconect the 'I'and 'S' wires.
I really want to see what kind of compression this motor is making.I'm not sure I can even get the test to all the holes.
oddly obsessed with big scoops on little Mustangs
14.9 @ 90.86MPH
65 coupe,351w,C4,Big Boss 429 hood scoop,8"3.40 TracLoc,Cragar SS,Black Suede.
From: Orange, Ca. United States of America
Registered: Dec 2001
posted 11-06-2002 06:56 AM
'I' being ignition, you don't want the motor starting up while you've got your head under the hood I pull the coil wire off too. Safety first 'S' is the starter switch, and you're taking its place with the remote.
I've always done compression checks with the motor at running temp and the carb butterflies wide open. That way you get the most accurate readings possible
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9"
All Blue Oval, no blue bottle
Contact Us | Mustangsandmore Front Page
Copyright 2003, Steve LaRiviere. All Rights Reserved.
Ultimate Bulletin Board 5.47d