Author
|
Topic: exhaust
|
nash Journeyman Posts: 99 From: Nashville, TN, USA Registered: Nov 2000
|
posted 11-18-2001 06:11 PM
How big are the exhaust outlet on a 65 gt rear valance. I wnat to use on on my car but want to use a 2-1/4" chrome tip tail pipe instead of the exhaust tumpets. Any one else done this. Thanks
IP: Logged |
Moneymaker Administrator Posts: 27870 From: Lyons, IL, USA Registered: May 99
|
posted 11-18-2001 06:14 PM
I have used 2 and 1/2 slash cut chrome tail pipes in the past using the trim rings. Much cooler than the funky trumpets. ------------------ Alex Denysenko Co-Administrator and Moderator NHRA/IHRA/SRA member NHRA and IHRA SS/LA National Record Holder '00 & '01 Fleet of FoMoCo products Moneymaker Bio US Class Nationals link
IP: Logged |
mellowyellow Gearhead Posts: 7459 From: So. Fl. Registered: Aug 2000
|
posted 11-18-2001 06:49 PM
I have 3" rolled edge bevel cut chrome tips. The original venetian blind trumpets sounded like s**t and are restrictive. The next owner will find them in the trunk. I think those tips are visible on my photo page.
IP: Logged |
nash Journeyman Posts: 99 From: Nashville, TN, USA Registered: Nov 2000
|
posted 11-19-2001 04:47 PM
Thanks, I like the exhaust coming out of the valance panel but don't want to restrict it with those trumpets. Anyone got a picture of this. Also, mellowyellow where is your photo page
IP: Logged |
SteveLaRiviere Administrator Posts: 46243 From: Saco, Maine Registered: May 99
|
posted 11-19-2001 04:53 PM
https://mustangsandmore.com/ubb/MellowYellow.html------------------ '70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open '72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip '97 Probe GTS 2.5L DOHC My Photo Page Ever wonder why they call it 'dogma?'
IP: Logged |