|
Author
|
Topic: Does anybody know...
|
bibbs68
Gearhead Posts: 438
From: Jackson, TN
Registered: Sep 2000
|
posted 08-14-2001 03:55 PM
   
While attending the national show in Nashville, Music City Show, I met a gentleman that had created half a mustang complete with working headlight, tail lights, etc.. He said that it had been placed in severl well known places such as Hard Rock Cafe and others. He makes all kinds of "off the wall" Mustangs. I know it is a long shot, but does anyone know this mans name. He gave me his card and I have misplaced it. He had a part that I was needing. Or perhaps one of you has this part and could help me out. I am in need of the aluminum trim piece that goes on the passenger side door of a '68.
IP: Logged |
mellowyellow
Gearhead Posts: 2561
From: So. Fl.
Registered: Aug 2000
|
posted 08-14-2001 04:18 PM
Sounds like he might have a lot of pass. side parts!!! Geez, I hope he didn't start with a rust free car. LOL!
IP: Logged |
JAAZZY
Gearhead Posts: 619
From: Bay Area, CA
Registered: Apr 2001
|
posted 08-14-2001 05:36 PM
I have a half cup like that. The caption on the side reads, "You asked for half a cup."  [This message has been edited by JAAZZY (edited 08-14-2001).]
IP: Logged |
mustangs68
Moderator Posts: 12581
From: Hampton,Virginia,USA 1968 Fastback & 1995 Vert MCA#39406 M&M #12
Registered: May 99
|
posted 08-14-2001 08:11 PM
K-Code may be able to help you.
Hey MIKE!
sam
IP: Logged |
kcode
Gearhead Posts: 1748
From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208
Registered: Jun 99
|
posted 08-14-2001 11:05 PM
I can't help any on this one, Jeremy and his beautiful wife got to roam the show field, while I had to work it. Actually I don't know of anyone that might have done that. Jeremy, got anymore info on this person, was he a vendor? Mike
IP: Logged |
bibbs68
Gearhead Posts: 438
From: Jackson, TN
Registered: Sep 2000
|
posted 08-15-2001 10:32 AM
quote:
Originally posted by kcode:
Jeremy, got anymore info on this person, was he a vendor?Mike
Mike, he was a vedor. He was set up about 2-3 spaces up from the Memphis Mustang booth.
IP: Logged |
kcode
Gearhead Posts: 1748
From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208
Registered: Jun 99
|
posted 08-15-2001 10:43 PM
Jeremy,
You have me confused, in Tennessee, does the word, UP, mean to the left or to the right Mike
IP: Logged |
bibbs68
Gearhead Posts: 438
From: Jackson, TN
Registered: Sep 2000
|
posted 08-16-2001 11:55 AM
quote:
Originally posted by kcode:
Jeremy,
You have me confused, in Tennessee, does the word, UP, mean to the left or to the right Mike
I said UP because the parking lot sloped up toward the mall. But since that was too complicated for you  , he was to the right. Your right, not mine!
IP: Logged |
bibbs68
Gearhead Posts: 438
From: Jackson, TN
Registered: Sep 2000
|
posted 08-20-2001 12:33 PM
Well, after an extensive house cleaning, I found the business card! His name is James Antrican of A&A Mustang Parts out of Oak Ridge TN. Thanks all for your help.
IP: Logged |
SteveLaRiviere
Administrator Posts: 17955
From: Saco, Maine MCA # 47773
Registered: May 99
|
posted 10-26-2001 02:05 PM
There's a Mustang just like that in a store called 'The Driver's Seat' in the Manchester, NH mall.------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC Recycle --- Restore a Classic Ford!
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
