|
Author
|
Topic: replacing dashlights on an 01 ranger
|
adragon8u
Gearhead Posts: 5867
From: Oceano, Ca. member# 2895
Registered: Mar 2003
|
posted 11-29-2006 09:18 PM
 
any ideas on how's the best/easiest method?
it appears that at least one is out on the tach side of the intrument panel.------------------
"It's bad luck to be superstitious"
http://mustangsandmore.50megs.com/MembersPics/adragon8u.html
|
Ryan Wilke
Gearhead Posts: 3237
From: Stanton, Michigan, zip 48888
Registered: Oct 2000
|
posted 11-30-2006 07:34 AM
Mike, Years ago, my '94 Ranger had burned-out dashlight bulbs. When I finally removed the instrument cluster portion (in the '94, I had to also remove the center dash portion including radio and climate controls just to get the instrument cluster pulled out) I decided to not only change out the burned-out bulbs but CHANGED OUT ALL THE DASH BULBS. For the little extra cost of a few more bulbs, I didn't want to have to go through that again anytime soon..... I'd recommend you do the same; change ALL the dash bulbs with new bulbs, even if they are still working now. Ryan 
|
adragon8u
Gearhead Posts: 5867
From: Oceano, Ca. member# 2895
Registered: Mar 2003
|
posted 11-30-2006 08:53 AM
Thanks Ryan. Good suggestion.
found this on a ranger forum and thought i'd share it.
http://fordcustoms.com/techarticles/tech10/
------------------
"It's bad luck to be superstitious"
http://mustangsandmore.50megs.com/MembersPics/adragon8u.html[This message has been edited by adragon8u (edited 12-02-2006).]
|
