400M Heater Hose barbs - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

400M Heater Hose barbs

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: 400M Heater Hose barbs
Scott G Journeyman Posts: 81 From: Chattanooga, TN USA Registered: Mar 2003	posted 12-08-2005 09:38 PM Hey guys, I am helping a friend replace his 400M in a 78 F150. He ordered a crate motor to replace it, and on the passenger side of the timing cover area, there are 2 smooth holes in the block. Looking at the engine we are pulling out, one has a barb for a heater hose in it, and the other has a freeze plug (these holes are only about 1/2" diameter). Where can I come by one of these press in barb fittings and a freeze plug? Thanks for the information. Scott IP: Logged
MLariviere Moderator Posts: 4120 From: Biddeford,Me.USA Registered: May 99	posted 12-08-2005 10:28 PM You should be able to get the freeze plug and heater hose stem at NAPA. The Cleveland uses the same heater hose stem. IP: Logged
Scott G Journeyman Posts: 81 From: Chattanooga, TN USA Registered: Mar 2003	posted 12-09-2005 04:36 PM Thanks. I will check there this weekend. Scott IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]