1984 f100 Vacum diagram - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

1984 f100 Vacum diagram

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: 1984 f100 Vacum diagram
majik455 Gearhead Posts: 184 From: duluth ga usa Registered: Jan 2005	posted 10-30-2005 10:49 AM Im having issues putting the hoses back right. Truck will not hold a idle below 2500 rpm)in gear without dying. it does great out of gear but bad times the second you put it in gear any gear. It has a 302 4v intake from a 68 mustang aod trans mild cam the rest is stock stuff. I was told it may be the transmission "locking up" no clue here. any help is app. Thanks Ron IP: Logged
MLariviere Moderator Posts: 4120 From: Biddeford,Me.USA Registered: May 99	posted 11-02-2005 09:54 PM Are you sure the intake isn't leaking itself? Sounds like a massive leak that could be found with ether. IP: Logged
majik455 Gearhead Posts: 184 From: duluth ga usa Registered: Jan 2005	posted 11-03-2005 06:40 AM I have check all around the intake and carb and found no leaks. I have also posted this In the racing forum due to lack of response due to it being a truck I guess. you may erase this one if you wish and ty for the help Ron IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]