|
Author
|
Topic: F250 and Trailer Hookups
|
SG236
Gearhead Posts: 416
From: Jasper, TN, USA
Registered: Dec 2000
|
posted 03-05-2004 05:10 PM
   
I have a 2000 Ford F-250 Super Duty truck and a 24' Pace enclosed trailer. The trailer has a automatic jack. I have a draw tite activator II brake controller that works fine. I have put the fuse in the power distribution box and the power to the jack still doesn't work.Anybody else have this problem or know a solution.
Thanks
IP: Logged |
Dave_C
Gearhead Posts: 968
From: Gadsden, Al
Registered: Aug 99
|
posted 03-05-2004 05:47 PM
quote:
Originally posted by SG236:
I have put the fuse in the power distribution box Thanks
Russ, did you put "both" fuses in place. It takes two. One for the brake controller and another one if you have 12V aux to the trailer. If that's in place I would take a look at the trailer plug. Use a battery and apply 12V to each pin until the jack works and then see if that pin matches up to the one on the truck. A couple of diagrams for the truck end and trailer end: http://www.marksrv.com/wiring.htm David Cole
IP: Logged |
SG236
Gearhead Posts: 416
From: Jasper, TN, USA
Registered: Dec 2000
|
posted 03-07-2004 07:31 PM
Dave thanks. I'll have to check about the 2 fuses. It's been a couple odf days since I took a look at it.
IP: Logged |
Mustangsandmore Forums
