|
Author
|
Topic: my f150 needs help too... hubs gone bad
|
mystangneedshelp
Journeyman Posts: 10
From: NJ
Registered: Apr 2004
|
posted 04-13-2004 11:37 PM
   
I purchased a set of hubs for my f150 ext cab 4X4. the kit I got was superwinch 400518. DO I need another coversion kit or something? website says yes if you have full time 4X4 or new process 203. DOes my truck have full time or this 203 transfer case. ? when I look undewr the truck front axel reads a welded 44. the transfer case reads" LO11 1 1356-62 107735 F27A Borg WARNER " Also I noticed the new hubs have 6 bolts/screws on hub cap. and my truck only has 5! If anyone can help me out and tell me about this job I would appreciate it. Thanks GuysTruck is a 92 and is stock, thanks [This message has been edited by mystangneedshelp (edited 04-15-2004).]
IP: Logged |
67stang
Gearhead Posts: 2356
From: Panama City, FL
Registered: Jun 99
|
posted 04-14-2004 10:40 PM
I am going to have to ask, what year truck?np 203 = full time transfer case (although it can be converted) And if your x-fer case is a Borg Warner (as stated), they never were full time IIRC.
IP: Logged |
Mustangsandmore Forums
