|
Author
|
Topic: 292 timing mark question
|
Mpcoluv
Gearhead Posts: 1090
From: Charlotte NC usa
Registered: Apr 2001
|
posted 04-01-2003 07:41 PM
   
My dad just called me up with a problem.
He can't find any timing marks on the harmonic balancer.
Where are the timing marks on a 61 F100 with a 292?
IP: Logged |
MLariviere
Moderator Posts: 3578
From: Biddeford,Me.USA
Registered: May 99
|
posted 04-01-2003 09:27 PM
They have to be on that balancer.Ford usually puts the pointer on the passenger side.
IP: Logged |
Mpcoluv
Gearhead Posts: 1090
From: Charlotte NC usa
Registered: Apr 2001
|
posted 04-02-2003 06:41 AM
quote:
Originally posted by MLariviere:
They have to be on that balancer.Ford usually puts the pointer on the passenger side.
He says that he has sanded the edge of the balancer and he still doesn't see any marks....
IP: Logged |
SteveLaRiviere
Administrator Posts: 36138
From: Saco, Maine
Registered: May 99
|
posted 04-02-2003 08:56 AM
By the looks of the pics on this page, http://www.rodandcustommagazine.com/tipstricks/74739/ it looks like there's a pointer on the passenger side and probably just a line on the balancer. Have your dad spin the engine over to TDC on #1, then look real closely at the balancer at the 10-11 o'clock position.------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Please remember our sponsors,
Mustangs Plus, NPD, Osborn Reproductions, MyFordPerformance.com, and FordRamAir.com
IP: Logged |
Bob Hopkins
Gearhead Posts: 254
From: BRIDGEPORT NJ USA
Registered: Jan 2001
|
posted 04-02-2003 11:42 AM
it took me bout a hour to clean the balancer to find the timing marks on my 56 292" they are realy faint Ford must have had a real small guy stamping them into place,friends 56 Lincoln was same way, pass side
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
