posted 12-02-2001 09:54 PM
I have a '78 ford pickup with a 351W. I have a Holley 4 barrel carb on it that is off a Ford van. (around 1980 vintage). My question is how do I hook up the electric choke so it works properly?
Posts: 20027 From: Saco, Maine USA Registered: May 99
posted 12-03-2001 08:05 PM
Just find a keyed wire. What are you having a problem with?
------------------ '70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open '72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip '97 Probe GTS 2.5L DOHC My Photo Page Christmas shopping? Why not use the Mustangsandmore.com Bookstore?
posted 12-03-2001 08:56 PM
I was under the impression that the electric choke takes something less than 12V to operate? And I thought it typically tied into the field lead or something on the alternator.
Posts: 2137 From: Biddeford,Me.USA Registered: May 99
posted 12-03-2001 08:57 PM
Probably the easiest place to find a keyed accy wire is at the fuse block accy post. DO NOT go to the wire to the coil. You don't want to drain current there.