macx Journeyman Posts: 15 From: Hermiston, OR, US Registered: Jun 2001
|
posted 09-05-2001 12:02 AM
Anybody tried one or know anything about them? I'm close to building a hi-torque long rod 351 efi targeting torque in the 2500 to 4000 rpm range (at the expense of peak hp numbers) based on an article I've got (can email) that got a stock stroke efi 351 to do 380hp at 4000 and 430 torque at 5000 on 87 octane by the proper parts mix. I want to do that one with a shorter duration cam (lower rpms' for the peaks) and more torque type intake and heads for a heavy cruiser with hiway gears. Most sb Ford efi intakes are geared toward higher rpm horsepower rather than lo-midrange torque, EXCEPT for that Ebock 351 truck efi intake. Thanks for any info! Mark
IP: Logged |
SteveLaRiviere Administrator Posts: 32655 From: Saco, Maine Registered: May 99
|
posted 09-07-2001 09:10 PM
I don't know anything about that intake, it looks ok.Have you thought about the '93-'95 Lightning intakes? ------------------ '70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open '72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip '97 Probe GTS 2.5L DOHC Keep your driveway ALL Ford!!!
IP: Logged |