|
Author
|
Topic: Header
|
67AJ
Journeyman Posts: 17
From: Tallulah La. 71282
Registered: Mar 2002
|
posted 04-14-2003 10:16 PM
   
Have a 1985 LTD 2 with a 302 engine with shift on colum. Do any one know of any header that will work.
IP: Logged |
Rory McNeil
Gearhead Posts: 1271
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 04-15-2003 03:27 AM
I believe that your LTD 2 is basically a FOX chassis. I used Hedman 1 1/2" full length headers on my 78 Fairmonts 302, with the column shifted C4. I did have to cut the end of the rod going from the transmission shift lever to the bellcrank, as it would hit a header tube. I don`t recall having to do anything else, but that was several years ago now.------------------
78 Fairmont 428 4 speed 10.20@130mph
80 Fairmont 302 5 speed 12.8@105mph
85 Mustang NHRA Stocker under construction, 302 5 speed
59 Meteor (Canadian Ford) 2 dr sedan 332, auto
74 F350 ramp truck 390 4spd
IP: Logged |
Moneymaker
Administrator Posts: 20207
From: Lyons, IL, USA
Registered: May 99
|
posted 04-20-2003 09:53 AM
We have full length headers that will fit.
$150 + shipping.
Any Mustang shorty header will also fit but is not worth the effort of installing them.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged | |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
