|
Author
|
Topic: Need help id'ing a part
|
dark7068
Journeyman Posts: 32
From: BC, Canada
Registered: May 2002
|
posted 05-25-2002 03:24 PM
   
I was told this is a very rare z-bar for a big block Fairlane/Torino. Is there an expert here that will let me know for sure, and what are they worth.Thanx here's a picture, http://communities.msn.ca/MyFordandMercury/mycars.msnw?action=ShowPhoto&PhotoID=900 Rick
IP: Logged |
MLariviere
Moderator Posts: 2393
From: Biddeford,Me.USA
Registered: May 99
|
posted 05-25-2002 09:18 PM
Not sure,Rick. Is there a part number on it? I have an interchange manual so I can look it up. I can't give you a value,though.[This message has been edited by MLariviere (edited 05-25-2002).]
IP: Logged |
dark7068
Journeyman Posts: 32
From: BC, Canada
Registered: May 2002
|
posted 05-25-2002 10:08 PM
There is a few numbers on it, but no p.n. Im used to. It has a S1V (I think) on one arm and 1AC I think on the other.
After searching other sites, and talking to other people, I found out it is a 390 4 speed bar out of a 68 Torino. Someone sent me a link of it, here it is. Thanx for the help. I was asking 75.US for it, now maybe more,lol.http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1828145048&r=0&t=0&showTutorial=0&ed=1021605256&indexURL=0&rd=1 Rick
IP: Logged |
SteveLaRiviere
Administrator Posts: 23026
From: Saco, Maine USA
Registered: May 99
|
posted 05-26-2002 06:03 PM
Holy crap!  ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
MCA Member # 47773 "Doubt is not a pleasant condition, but certainty is absurd."
- Voltaire
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
