|
Author
|
Topic: where to get unibody parts, 1969 GT
|
Rustang
Gearhead Posts: 223
From: Dubois PA
Registered: Nov 2000
|
posted 05-03-2002 11:11 PM
   
Does anybody offer the radiator support and the structure where the strut rod mount welds to? I need to replace mine due to battery corrosion over the years.------------------
'68 mustang 351 clevor- 10.92@124
'67 Stang, 351W -11.18@118
'69 351C Torino-14.90@100
'78 Pickup 351W-15.56@88
'79 Pickup 460 ET=??
IP: Logged |
SteveLaRiviere
Administrator Posts: 23026
From: Saco, Maine USA
Registered: May 99
|
posted 05-05-2002 08:23 PM
Have you checked Perogie http://www.perogie.com/
or Dearborn Classics? http://www.dearbornclassics.com/------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
MCA Member # 47773 "Doubt is not a pleasant condition, but certainty is absurd."
- Voltaire
IP: Logged |
Thud
Gearhead Posts: 852
From: Cumming,Ga.,USofA
Registered: Jun 99
|
posted 05-06-2002 07:34 AM
Obsolete Ford Parts
311 E.Washington St.
Nashville, GA 31639
229-686-2470They have core supports and used to have entire NOS shock tower/frame rail assemblies for '69 Torinos/Fairlanes/Cyclones. [This message has been edited by Thud (edited 05-06-2002).]
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
