|
Author
|
Topic: brake drums frt.
|
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 04-26-2002 11:42 PM
   
Do 63&64 Fairlanes use the same front brake drums?Thanks,
63 fairlane
IP: Logged |
MLariviere
Moderator Posts: 2393
From: Biddeford,Me.USA
Registered: May 99
|
posted 04-27-2002 10:10 PM
Yes. Interchange #4,C3OZ1102C,from 62-66 Fairlane,62-63 Merc Meteor,66-67Comet,64.5-66 Mustang,65-66 Falcon,67 Cougar,with 6cyl or 289,depending on # of studs,of course!  [This message has been edited by MLariviere (edited 04-27-2002).]
IP: Logged |
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 04-28-2002 12:24 AM
Thanks much.Off too e-bay we go.
63fairlane  quote:
Originally posted by MLariviere:
Yes. Interchange #4,C3OZ1102C,from 62-66 Fairlane,62-63 Merc Meteor,66-67Comet,64.5-66 Mustang,65-66 Falcon,67 Cougar,with 6cyl or 289,depending on # of studs,of course! [This message has been edited by MLariviere (edited 04-27-2002).]
IP: Logged |
roger
Journeyman Posts: 84
From: ontario, canada
Registered: Aug 2000
|
posted 04-29-2002 12:33 PM
i have front drums, spindles, master cylinder, booster off my 62 F'lane if you're intersted let me know
Roger
IP: Logged |
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 04-29-2002 12:40 PM
Roger ,Hi.Yes very intrested.Hoe much and is it new stuff?If not ,what condition is it in?------------------
63 fairlane
IP: Logged |
roger
Journeyman Posts: 84
From: ontario, canada
Registered: Aug 2000
|
posted 04-30-2002 12:40 PM
[QUOTE]Originally posted by 63fairlane:
Roger ,Hi.Yes very intrested.Hoe much and is it new stuff?If not ,what condition is it in? I took them off when i went to granada spindles, discs. the drums were about a year old, spindles are original spindles, i might even have the shoes and all, have to look. I'm in Toronto, Ontario Canada so let me know your address/zip to figure out shipping to you. If its not to prohibitive i can ship COD to you. As far as cost goes if you're going to put them to good use pay the shipping and there yours. Now, if you don't need spindles and are looking for new drums/shoes you're no doubt better off just ordering them new from Special Interest Cars in Oakville. Ontario.(they advertise on Woodys main page). Let me know
Roger
IP: Logged |
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 04-30-2002 03:53 PM
Hi Roger,Mostly I'm intrested in the drums.But I see that you mentioned a booster.Are you refering to a power brake booster?Did it work when you removed it?That is an item I'v also looked for.I'd like to put power brakes on the 63 as we (my son & I)have re-powered the car and it needs a little more help stopping now 
Also do you think the booster would work along with rear disks that I plan to install(if I ever find what car or truck rear disks will adapt to my 9")this summer.
My zip is 49028
Town-Bronson Mich.
Please finde out the shipping for those two items and I'll send you a postel M/O.
If you have the shoes I'll take them also.
Thank You very much Roger.
John------------------
63 fairlane
IP: Logged |
roger
Journeyman Posts: 84
From: ontario, canada
Registered: Aug 2000
|
posted 05-01-2002 12:43 PM
[QUOTE]Originally posted by 63fairlane:
Hi Roger,Mostly I'm intrested in the drums.But I see that you mentioned a booster.Are you refering to a power brake booster?Did it work when you removed it?That is an item I'v also looked for.I'd like to put power brakes on the 63 as we (my son & I)have re-powered the car and it needs a little more help stopping now
Also do you think the booster would work along with rear disks that I plan to install(if I ever find what car or truck rear disks will adapt to my 9")this summer.
My zip is 49028
Town-Bronson Mich.
Please finde out the shipping for those two items and I'll send you a postel M/O.
If you have the shoes I'll take them also.
Thank You very much Roger.
Johnbefore i put discs on i incororated a 66 power booster using my original jam jat single master cylinder & they worked great when i finally put the pushrod to the right mount on my brake pedal. It seems that manual & power brake pedals have a different leverage factor so something you should think about if your brakes are original manual. You can have the shoes, drums spindles but i'm afraid the 66 power booster would cost you $75.00, what i paid for it aroiund 6 years ago
I will figure out shipping
Roger
IP: Logged |
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 05-02-2002 12:20 AM
Hi again,I'll go 75 on the booster.Is that Canadian or us $ ?Did you have a v8 in the car when you used the booster?Dosen't look like much room to clear the valve covers ------------------
63 fairlane
IP: Logged |
roger
Journeyman Posts: 84
From: ontario, canada
Registered: Aug 2000
|
posted 05-03-2002 04:53 PM
quote:
Originally posted by 63fairlane:
Hi again,I'll go 75 on the booster.Is that Canadian or us $ ?Did you have a v8 in the car when you used the booster?Dosen't look like much room to clear the valve covers
With original single master cylinder it clears the hood just fine, it looks a bit weird but yes everything cleared, again, i used power booster with manual pedal so even when i got the push rod on the right fitting on pedal arm brakes were quite sensitive, seems the power brake arm has more(or is it less) leverage) something to think about if converting from manual to power brakes, the $75.00 is Canadian plus shipping from Toronto
Roger
IP: Logged |
SteveLaRiviere
Administrator Posts: 23026
From: Saco, Maine USA
Registered: May 99
|
posted 05-03-2002 08:26 PM
I wouldn't use the single reservoir master cylinder on a lawn tractor. One leak and you're history.  ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
MCA Member # 47773 The secret of success is sincerity. Once you can fake that, you got it made.
IP: Logged |
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 05-04-2002 08:35 AM
Good point Steve.Hey Steve here is my e-mail so we can make arrangments.
[email protected]------------------
63 fairlane
IP: Logged |
63fairlane
Journeyman Posts: 19
From: Bronson,Mich.,USA
Registered: Feb 2002
|
posted 05-04-2002 08:37 AM
I ment Roger on the e-mail.Been a long nite.------------------
63 fairlane
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
