Author
|
Topic: lower radiator hose
|
3154tm Journeyman Posts: 37 From: Pensacola, Fl Registered: Feb 2006
|
posted 06-10-2006 12:27 PM
i'm trying to swap a 5.0 into a '65 ranchero and now the water pump inlet and the radiator outlet are on the driver's side. i'd like to use a molded hose here but nothing seems to fit. before i spend a whole day at NAPA trying to find something does anyone here have a part number or reference for a molded hose that can be made to fit. thanks.
|
3154tm Journeyman Posts: 37 From: Pensacola, Fl Registered: Feb 2006
|
posted 07-28-2006 04:40 PM
just a follow up to the cooling saga. i ended up using a NAPA hose # 8685. don't know what it's supposed to fit and i had to trim both ends. it fits well and hasn't collapsed at high rpm. thanks to all who offered advice and suggestions. frank
|
KULTULZ Gearhead Posts: 959 From: Rockville, MD Registered: Oct 2002
|
posted 07-29-2006 07:56 PM
This is a little late; ------------------ Am Looking For Factory/Aftermarket Speed Parts For The MEL (MERC-EDSEL-LINC-TBIRD) Engine Family (383-410-430-462) Produced From 1958 To 1968 Also Early FORD Special Service Tools -Mercury-Edsel-Lincoln- Forum-
|
KULTULZ Gearhead Posts: 959 From: Rockville, MD Registered: Oct 2002
|
posted 07-30-2006 04:37 AM
quote: Originally posted by KULTULZ:This is a little late;
huKt oN foNIX...wuRX 4 mEE! Just pretend the above post didn't happen... I seem to be a little weak from hunger lately as someone is a little tardy on the pizza delivery... ------------------ Am Looking For Factory/Aftermarket Speed Parts For The MEL (MERC-EDSEL-LINC-TBIRD) Engine Family (383-410-430-462) Produced From 1958 To 1968 Also Early FORD Special Service Tools -Mercury-Edsel-Lincoln- Forum-
|