Steering gear box mod - Mustangsandmore Forum Archive

Brought to you in part by:

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

Small Fords and Mercurys

Steering gear box mod

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: Steering gear box mod

boss9
Journeyman

Posts: 70
From: Akron, Ohio
Registered: Mar 2006

posted 03-29-2006 03:07 PM

This may be old news to you guys but for those who haven't heard of it... I don't have power steering (not sure if that even matters). I took the steering gear box cover off and was suprised to find minimal grease in there !! This will definitly cause tough steering. So, I cleaned the lid to bare metal with a wire wheel, drilled and tapped a zirk fitting in. Now when I grease other areas of the car, I can do this as well without removing lid again.

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Members' Pics]
[Tech Articles]