|
Author
|
Topic: toploader
|
bewford429
Journeyman Posts: 4
From: IN
Registered: Aug 2005
|
posted 08-18-2005 09:42 PM
   
have 77 302 mav with c-4 want to put in a top loader what do i need besides trans,bellhousing, and shifter??????????
IP: Logged |
N266fords
Gearhead Posts: 1652
From: Sierra Vista ,Az USA
Registered: Apr 2003
|
posted 08-19-2005 08:23 PM
New tires,lol
Sorry I am no help...
Bruce Williams
IP: Logged |
trashline
Gearhead Posts: 1808
From: Levittown, Pa
Registered: Dec 2003
|
posted 08-19-2005 08:28 PM
this could be hard but a clutch pedel as well. include driveshaft or yoke for the 4 speed. clutch linkage. best bet would be put a manual valve body and a shft kit in the c4 and run that it will probably be cheaper or find a parts car thats a stick and grab it all. maybe a 77 mustang setup will fit. but youcould end up spending alot of money as toplaoders can cost some bucks------------------
88 thunderbird TC 2.3L
66 mustang 200ci 3 speed
68 Fairlane 289 w/ auto
79 f150 300 3 onda tree
IP: Logged |
bewford429
Journeyman Posts: 4
From: IN
Registered: Aug 2005
|
posted 08-20-2005 07:29 PM
well i hate autos especally the one in the car leaks alot and seems like i'm always fixing it. i already have clutch pedals, the trans, bellhousing, and shifter. the mai issue is the linkage this seems to be a rare thing from the factory. i thought that maybe someone on here could help
------------------
four doors no waiting
IP: Logged |
trashline
Gearhead Posts: 1808
From: Levittown, Pa
Registered: Dec 2003
|
posted 08-20-2005 07:37 PM
the clutch linkage, just go purchase a cable conversion setup. or make your own------------------
88 thunderbird TC 2.3L
66 mustang 200ci 3 speed
68 Fairlane 289 w/ auto
79 f150 300 3 onda tree
IP: Logged |
bewford429
Journeyman Posts: 4
From: IN
Registered: Aug 2005
|
posted 08-20-2005 10:18 PM
huh the only cable kit i thought was sold was for the 5-sp conversion's. who sells the top loader cable kit ------------------
four doors no waiting
IP: Logged |
69maverick
Moderator Posts: 1486
From: Thomaston,CT.
Registered: Jan 2001
|
posted 08-22-2005 01:07 AM
My guess is you don't want to hear this,But you can buy the stock units on ebay but they cost about 100.oo bucks or Auto krafters sells it. But take it from someone who has done this. Buy a good C-4 with a 3500 stall and a manual valve body and you will be much happier! P.S. There is a cable conversion for the 66-68 mustangs it should work on a Mav. But I have not done it yet but I'm going to next year!
IP: Logged |
Mustangsandmore Forums
