|
Author
|
Topic: brakes
|
maverickman
Journeyman Posts: 3
From:
Registered: Aug 2004
|
posted 08-30-2004 10:31 AM
   
I have converted my 71 maverick to manual disc brakes. Is there a power booster that will mount to my master cylinder's mounting holes in the firewall. The power boosters I have found is a 4 studded booster. Is there a 2 hole booster out there or will I have to change the structure under the dash?
IP: Logged |
todmeg
Gearhead Posts: 425
From: sayreville,nj
Registered: Apr 2001
|
posted 08-30-2004 08:36 PM
mavman i am not sure about a power booster fitting in your car. i will say this....if you didn't get a new master cyl yet, do it. make sure you ask for a MANUAL disc brake master cyl. they are different than power brake masters as well as drum master cyls. we did the swap on both our mavericks and stayed with manual brakes. all things done right, you will find you can put yourself through the windshield without a whole lot of pedal pressure. also, trying to find a booster is a hassle as well as the different support that goes from the firewall to the top of the shock tower. best of luck.------------------
scott
todds' dad
MCCI nj state rep
1972 4door-250 c4
1970 302,c4, firehawks+ansens.
IP: Logged |
69maverick
Moderator Posts: 1486
From: Thomaston,CT.
Registered: Jan 2001
|
posted 09-01-2004 10:01 PM
I second what scott says!! More than enough
to brake your neck!
IP: Logged |
roger
Gearhead Posts: 235
From: ontario, canada
Registered: Aug 2000
|
posted 12-30-2004 12:18 AM
RcMtorsports has a power booster for you but you shouldn;t need it
IP: Logged |
todmeg
Gearhead Posts: 425
From: sayreville,nj
Registered: Apr 2001
|
posted 12-30-2004 09:56 PM
wow! this is an old thread! since then i have aquired a power brake setup including the funny looking brace. ------------------
scott
todds' dad
MCCI nj state rep
1972 4door-250 c4
1970 302,c4, firehawks+ansens.
IP: Logged |
Mustangsandmore Forums
