|
Author
|
Topic: Arg!
|
70MAVRK
Journeyman Posts: 55
From: Puyallup, WA, USA
Registered: Oct 2003
|
posted 03-16-2004 11:42 PM
   
Okay so we made mounts for the 302 for my mav. It sits too high, and now I cant fit the damn air cleaner on. I give up with making mounts. Can someone give me a link to where I can find motor mounts and the supports? I havent found any links successful yet. The I6 ones obviously dont work. I just wanna drive!!! Appreciate any help.[This message has been edited by 70MAVRK (edited 03-16-2004).]
IP: Logged |
scrapper60
Journeyman Posts: 32
From: Tuscumbia Al. USA
Registered: Sep 2002
|
posted 03-17-2004 11:25 PM
The 302 uses mounts unique to Mavericks. Look for "frame mounts". Then the motor mounts fit to these. If no one here has them, look on the Maverick message board or the Cameo board classified section.
AutoKrafters may have some too.
Good luck,
Jerry O.
IP: Logged |
todmeg
Gearhead Posts: 421
From: sayreville,nj
Registered: Apr 2001
|
posted 03-18-2004 11:20 AM
http://www.fordexchange.net
go here... i know wes has everything you need. he is a good guy too! tell him scott said "hi"------------------
scott
todds' dad
MCCI nj state rep
1972 4door-250 c4
1970 302,c4, firehawks+ansens.
IP: Logged |
69maverick
Moderator Posts: 1455
From: Thomaston,CT.
Registered: Jan 2001
|
posted 03-18-2004 12:15 PM
I checked Auto Krafters yesterday for him and I didn't see them listed. I have one I don't remember what side it is. maybe we can come up with a pair? Does anyone have any odd-balls? I don't want any personal accounts of this just the facts!! 
IP: Logged |
KULTULZ
Gearhead Posts: 783
From: Rockville, MD
Registered: Oct 2002
|
posted 03-18-2004 03:04 PM
-MAVERICK V-8 SWAP-
IP: Logged |
todmeg
Gearhead Posts: 421
From: sayreville,nj
Registered: Apr 2001
|
posted 03-18-2004 07:58 PM
jim.... speaking of odd balls....
there once was a man from myziz.
he had balls of various sizes.
one was so small you couldn't see it at all, the other so large it won prizes!
sorry..... just had to.------------------
scott
todds' dad
MCCI nj state rep
1972 4door-250 c4
1970 302,c4, firehawks+ansens.
IP: Logged |
70MAVRK
Journeyman Posts: 55
From: Puyallup, WA, USA
Registered: Oct 2003
|
posted 03-19-2004 12:01 AM
I feel quite accomplished. Modified our mounts to fit (without air cleaner). I'm going to get the Mr. Gasket Street Scoop II. In the process of making a custom tranny crossmember for the AOD. I will have to hunt for a driveline that is about 2 inches longer than mine, but how card could it be? Ha, to think I almost payed for something I could make 
IP: Logged |
scrapper60
Journeyman Posts: 32
From: Tuscumbia Al. USA
Registered: Sep 2002
|
posted 03-19-2004 09:21 PM
Congratulations, you should be proud. No doubt you have talents some of us wish we had. Good luck with your project.Jerry
IP: Logged |
Mustangsandmore Forums
