|
Author
|
Topic: c4 transmission problem
|
shinotai
Journeyman Posts: 15
From: Moses Lake, WA, USA
Registered: May 2001
|
posted 08-23-2003 02:58 AM
   
one question does anyone know of a way to replace the intermediate band on a c4 a/t without removing the transmission from the car? any info is greatly appreciated, thanks guys
IP: Logged |
SteveLaRiviere
Administrator Posts: 43395
From: Saco, Maine
Registered: May 99
|
posted 09-06-2003 10:06 PM
I believe the band will go around the drum with the drum assembly still in the transmission. I can't really remember.------------------
'70 Mustang Mach 1 - '70 Mustang Convertible - '72 Mustang Sprint - '94 F-150
IP: Logged |
SteveLaRiviere
Administrator Posts: 43395
From: Saco, Maine
Registered: May 99
|
posted 09-06-2003 10:09 PM
Wait a minute, of course it will. When you assemble a C4, you have all the rotating gear in before you flip it horizontal to install the bands. You don't put the bands in first.So the answer is yes. ------------------
'70 Mustang Mach 1 - '70 Mustang Convertible - '72 Mustang Sprint - '94 F-150
IP: Logged |
69maverick
Moderator Posts: 1459
From: Thomaston,CT.
Registered: Jan 2001
|
posted 09-07-2003 08:15 AM
Steve I put my C4 from the mav. in my sons 68 stang-351W yesterday with a converter fron a 6 cyl. car it seemed to work fine then on its first trip down the road only about a half mile he pulled up to stop sign and when he got on it to go it popped out of gear and the only thing that works now is park!! Do you think the converter would pop this fast? I know a few people that have done this with great results.
IP: Logged |
N266fords
Gearhead Posts: 1453
From: Spokane ,WA USA
Registered: Apr 2003
|
posted 09-07-2003 10:14 PM
Are you low on fluid the converter might of ballooned on you and now its low on fluid.Dont know just a thought..Bruce
IP: Logged |
69maverick
Moderator Posts: 1459
From: Thomaston,CT.
Registered: Jan 2001
|
posted 09-08-2003 02:25 PM
I pulled it out and put a different converter in It ran great for about 5 miles and now it won't move!
IP: Logged |
shinotai
Journeyman Posts: 15
From: Moses Lake, WA, USA
Registered: May 2001
|
posted 09-11-2003 03:43 PM
Hey steve, thanks for the info its been a while since i did my last overhaul and forgot a few things, obviously.will be under the car in about a hour or so will let you know how it turns out thanks again darren
IP: Logged |
SteveLaRiviere
Administrator Posts: 43395
From: Saco, Maine
Registered: May 99
|
posted 09-11-2003 07:03 PM
quote:
Originally posted by 69maverick:
Steve I put my C4 from the mav. in my sons 68 stang-351W yesterday with a converter fron a 6 cyl. car it seemed to work fine then on its first trip down the road only about a half mile he pulled up to stop sign and when he got on it to go it popped out of gear and the only thing that works now is park!! Do you think the converter would pop this fast? I know a few people that have done this with great results.
It could I suppose. Have you checked if the filter is plugged? Also, the gasket between the valve body and case could have blown. ------------------
'70 Mustang Mach 1 - '70 Mustang Convertible - '72 Mustang Sprint - '94 F-150
[This message has been edited by SteveLaRiviere (edited 09-11-2003).]
IP: Logged |
kid vishus
Gearhead Posts: 6144
From: middle of NC
Registered: Oct 2000
|
posted 09-11-2003 10:05 PM
Or in a freak case, it could have broke the Bellevile spring. That's the way my race trans acts awhne that spring breaks. Nothing excpet for park works. But I htink in a non race application, it would be highly unlikely for it to break.
IP: Logged |
Mustangsandmore Forums
