Author
|
Topic: Need some help with parts interchangeing
|
bob1963 Journeyman Posts: 42 From: Highland,Illinois Registered: Feb 2003
|
posted 08-14-2003 09:40 PM
Hi, I have a few parts that I'm having a hard time selling on the Falcon boards,I taught that if I put them on another models board I would have better luck selling them. The interchange books that I have from a company called Auto Interchange Systems or not too detailed. The parts are originally from a 1963 2 door hard top Falcon. The front passenger side bottom door hinge I can't even find in my book. I would like to know what other models it will fit and if it will fit the 2 door,4 door hard tops and sedan models and what years. I also have a passenger side rear window regulator I would like to know the same information for it.My book says it will fit 1960 to 1964 Falcon,1960 to 1965 Comet but does not tell me if it will fit just the 2 door hard tops or if it will fit 2 door and 4 door hard tops and sedans. The last item I have is the under dash windshield wiper transmission ( the scissors or arms that attach the wiper motor to the pivots going trough the cowl.) My book says it will fit 1962,1963 Falcon but does not tell me if it fits any other models or the years of those models.If some one has another source for parts interchanging Your help and reply via e-mail would be greatly appreciated. ( [email protected] ) Thanks in advance Bob
IP: Logged |
SteveLaRiviere Administrator Posts: 33989 From: Saco, Maine Registered: May 99
|
posted 09-06-2003 10:12 PM
Since you wanted an answer via email, I'll assume someone's already helped you.------------------ '70 Mustang Mach 1 - '70 Mustang Convertible - '72 Mustang Sprint - '94 F-150
IP: Logged |
bob1963 Journeyman Posts: 42 From: Highland,Illinois Registered: Feb 2003
|
posted 09-06-2003 11:51 PM
Steve, I have not found out for sure on the door hinge or the window regulator. the wiper arm trans.has been sold. if you can help with the other 2 parts it would be appreciated.
IP: Logged |