|
Author
|
Topic: Radiator ????
|
Tea'sGrabber
Gearhead Posts: 276
From: Seattle, Wash.
Registered: Feb 2003
|
posted 03-10-2003 10:58 AM
   
I was wondering if anyone knows where I can get an aluminum radiator for my Grabber? Would prefer a crossflow... Any info would be helpful!!! thanks------------------
Todd 71 Mav Grabber All orig 306 cu.in. Cast Iron heads. Carillo Rods.Best et. 10.71 @ 124 thru the mufflers.
IP: Logged |
cpmaverick
Gearhead Posts: 1666
From: Santa Clarita, CA
Registered: Jan 2000
|
posted 03-12-2003 02:31 PM
Look at Mustang radiators. They are a very similar size, in fact I know the 69 Mustang radiators will bolt into a Maverick. ------------------
-Charlie Ping
1970 Maverick Grabber
[email protected] with AC and overdrive.
http://www.maverickgrabber.com
IP: Logged |
Tea'sGrabber
Gearhead Posts: 276
From: Seattle, Wash.
Registered: Feb 2003
|
posted 03-12-2003 04:23 PM
Thanks....... 69 will bolt right in? No modifications?------------------
Todd 71 Mav Grabber All orig 306 cu.in. Cast Iron heads. Carillo Rods.Best et. 10.71 @ 124 thru the mufflers.
IP: Logged |
cpmaverick
Gearhead Posts: 1666
From: Santa Clarita, CA
Registered: Jan 2000
|
posted 03-12-2003 09:44 PM
According to Hollander, 1970-1 Maverick/Comet 6 cyl Radiator is the same as a 67-70 Mustang & Cougar 6 cyl. So I would assume that any aftermarket radiator for the Mustang of that vintage would bolt right in. Although it lists only 70-71, I know all Maverick radiators are interchangable so don't worry about that.
------------------
-Charlie Ping
1970 Maverick Grabber
[email protected] with AC and overdrive.
http://www.maverickgrabber.com
IP: Logged |
SteveLaRiviere
Administrator Posts: 43395
From: Saco, Maine
Registered: May 99
|
posted 03-13-2003 10:13 AM
Remember, there are two types of radiators for the '67-'70 Mustang. The 20" type that bolts to the radiator support, and the 24" HD type that sits in radiator mounts.------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Please remember our sponsors,
Mustangs Plus, NPD, Osborn Reproductions, MyFordPerformance.com, and FordRamAir.com
IP: Logged |
Tea'sGrabber
Gearhead Posts: 276
From: Seattle, Wash.
Registered: Feb 2003
|
posted 03-13-2003 10:31 AM
Thanks again!!!!!!------------------
Todd 71 Mav Grabber All orig 306 cu.in. Cast Iron heads. Carillo Rods.Best et. 10.71 @ 124 thru the mufflers.
IP: Logged |
Mustangsandmore Forums
