|
Author
|
Topic: wiring
|
Al Spears
Journeyman Posts: 8
From: Lebanon,Tn.
Registered: Jun 2001
|
posted 07-08-2001 12:05 PM
   
I am in the process of grafting a tilt steering from a 88 TURBO BIRD into my 74 MAV
but I need the wiring diagrams for the colum.
It has cruse on the wheel and it's for a floor shift.
Anyone got a clue as to where I can get the needed info?
IP: Logged |
cpmaverick
Gearhead Posts: 1602
From: Auburn, AL.
Registered: Jan 2000
|
posted 07-08-2001 03:05 PM
Yeah, on such a late model car you should be able to get the diagrams from any repair shop.Call around and ask. Most shops have CD-ROM or DVD diagrams which are printable. If the shop has AllData, Mitchell On-Demand, or RepairSource, they can print the diagrams for you.
IP: Logged |
Al Spears
Journeyman Posts: 8
From: Lebanon,Tn.
Registered: Jun 2001
|
posted 07-08-2001 03:30 PM
quote:
Originally posted by cpmaverick:
Yeah, on such a late model car you should be able to get the diagrams from any repair shop.Call around and ask. Most shops have CD-ROM or DVD diagrams which are printable. If the shop has AllData, Mitchell On-Demand, or RepairSource, they can print the diagrams for you.
Thanks CP I'll do that
IP: Logged |
SteveLaRiviere
Administrator Posts: 37258
From: Saco, Maine
Registered: May 99
|
posted 07-14-2001 07:27 PM
You may be able to find a Motor manual in a library and photocopy the diagram.------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC {Wife's car...}
All Fords since 1977
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
