|
Author
|
Topic: granada disc brakes
|
koolkat68
Journeyman Posts: 2
From: hayward, ca usa
Registered: Mar 2003
|
posted 03-08-2003 02:32 AM
   
i am preparing to do the granada swap on my 68 cat. Has anyone done this? I ahve read the article here and noticed at the end he has pics of the center link and other items that are not mentioned in the article but he shows them as pics. other than tie rod ends does anything alse have to be changed to the steering linkages?
IP: Logged |
SteveLaRiviere
Administrator Posts: 37258
From: Saco, Maine
Registered: May 99
|
posted 03-08-2003 03:54 PM
Welcome to M&M! I believe you can use your existing center link and inner tie rods ends, use just need the different sized outer tie rod ends. ------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Please remember our sponsors,
Mustangs Plus, NPD, Osborn Reproductions, MyFordPerformance.com, and FordRamAir.com
IP: Logged |
68 S-code GT
Gearhead Posts: 1291
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 03-10-2003 02:20 PM
Welcome!!! You will have to match up the brake lines. You can get ones already made up from Mustang Plus or make your own.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
