Master Cylinder choices - Mustangsandmore Forum Archive

Brought to you in part by:

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

'94 to '04 -- The SN95 Mustang

Master Cylinder choices

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: Master Cylinder choices

lonewolf
Gearhead

Posts: 419
From: Colorado; M&M #3117
Registered: Jul 2003

posted 05-24-2006 04:39 PM

Gents. I am having a hard time running down a brake MC for a 94 cobra. I believe I can sub in a unit from a Mercury Villager the difference being the bore size. The Cobra uses a 15/16" bore, the Villager a 1" bore. This is actually for my FFR Roadster running Cobra 13" fronts and 11.65 rears using a Fox body booster.

Has anyone swapped to a 1" MC with power assisted brakes? If so, good, bad, ugly?

thanks in advance,

Rick

------------------
Lonewolf
1968 Coupe in Pieces
99 1/2 F250
FFR MkIII

Scott G
Journeyman

Posts: 87
From: Chattanooga, TN USA
Registered: Mar 2003

posted 06-04-2006 01:52 PM

http://www.discbrakesrus.com/make/ford/cobra.htm

Very long page, but the master cylinder is the 3rd line from the bottom for the 94-95 MC. Hope that helps.

Scott

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Members' Pics]
[Tech Articles]