Author
|
Topic: brake squeaks
|
sigtauenus Gearhead Posts: 3969 From: Va Beach Registered: Jun 2000
|
posted 02-26-2006 01:58 PM
Hi all, The 03 Mach 1 has some brake squeaks coming from the rear wheels occassionally. The cars 36 month warranty is up at the end of May, are brakes covered by the initial warranty and should I have them check it out? The car only has 15,300 miles on it right now. Is this as easy as pulling a wheel and spraying some brake cleaner on there to fix it? I just figure 15,000 miles is way too soon to have the brakes squeaking is all.
|
SkinnyMan Gearhead Posts: 916 From: Tupelo, MS - USA (CA temporarily) Registered: Jan 2005
|
posted 02-26-2006 09:59 PM
quote: Originally posted by sigtauenus: Hi all, The 03 Mach 1 has some brake squeaks coming from the rear wheels occassionally. The cars 36 month warranty is up at the end of May, are brakes covered by the initial warranty and should I have them check it out? The car only has 15,300 miles on it right now. Is this as easy as pulling a wheel and spraying some brake cleaner on there to fix it? I just figure 15,000 miles is way too soon to have the brakes squeaking is all.
I'd try the cleaner first. You may also want to take any glaze off the pads that may be present - wire brush (hand powered).Don't do what my brother did a long time ago with his Cushman Eagle scooter - brakes squeak; olil elimnates squeaks; oil brakes. A comedic moment followed as he had to run the scooter into a hedge row to get stopped. ------------------ SkinnyMan Tupelo, MS Thank you, Thank you very much! [This message has been edited by SkinnyMan (edited 02-26-2006).]
|
hwyman3 Gearhead Posts: 2592 From: Southern Maryland, USA Registered: Jul 2004
|
posted 02-26-2006 10:10 PM
I had to redo the brakes on my 02 GT at around 55,000. I needed rotors too at that change.------------------ Greg W. M&M #3962 MCA #52100 2002 Laser Red GT Coupe The Highwayman 3 1991 F-150 XLT 4x2 5.0 Ole Faithful Southern Maryland Mustang Club http://mustangsandmore.50megs.com/MembersPics/hwyman3.html [This message has been edited by hwyman3 (edited 02-26-2006).]
|