|
Author
|
Topic: What would (1) flow on an '03 6cyl sound like?
|
66drop
Gearhead Posts: 141
From: Roseville Ca
Registered: Jul 2004
|
posted 07-19-2004 12:30 PM
   
I've got a buddy who has just purchased an '03 6cyl sliver 'Stang. ( I know, I know, he did it for the gas mileage, he has a big commute to work and back everyday  ). Anyway, he just tinted, threw some 18 in chrome Cob's on it and now he is wondering what kind of sound he would get out of 1 flowmaster. Can anyone help with info? Does anyone know anyone with a 6 who has done this? Its O.K. you can speak up you don't have to be  (No I'm only KIDDING all of you 6cyl owners you are all my boys too, you are still apart of the Mustang family).  [This message has been edited by 66drop (edited 08-12-2004).]
IP: Logged |
Mooney
Gearhead Posts: 1943
From: Marietta, Ga
Registered: Oct 2003
|
posted 07-19-2004 12:41 PM
My mum had a 96 Mustang with the V6 with a single flow. It sounded all right. Not the V8 sound. But still. Better than nothing.
He also might want to consider a dynomax turbo... they sound alot better than flows in my opinion.
IP: Logged |
xxx5oHb0mbsheLLxxx
Journeyman Posts: 33
From: Franklin, VA
Registered: Aug 2004
|
posted 08-12-2004 02:49 PM
On my 97 V6 I put dynomax true duals on it....it was not V8 but sounded damn good to be a V6. I wouldn't put Flows on a V6...go with dynomax
IP: Logged |
CalSpecMustang
Gearhead Posts: 185
From: kansas
Registered: Oct 2003
|
posted 08-13-2004 04:10 PM
I actually met a kid a few nights ago with a 94 6cyl mustang and he had one dynomax TURBO on his it sounded good for a 6cyl with 1 muffler. It beats sounding stock thats for sure.
IP: Logged |
mustangs68
Moderator Posts: 24577
From: Buckroe Beach Va MCA#39406 M&M #12 Member Mustang Club of Tidewater
Registered: May 99
|
posted 09-05-2004 01:18 PM
Little slow on this one sorry.
The son took his 96 V6 (now traded in)and our local exhust shop done a dual on it.Excellent sound using some "generic" short performance mufflers.
IP: Logged |
exlocal
Gearhead Posts: 688
From: hacienda hts., CA, USA
Registered: Dec 2004
|
posted 12-27-2004 11:04 PM
My son has a 02 V6. Sounds okay for single exhaust with the skinny factory headers. I advised him not to do anything with the exhaust, a waste of money IMO. Why make a dual exhaust when a real V8 will show up and blow your doors off? (Flame suit on)
IP: Logged |
mustangs68
Moderator Posts: 24577
From: Buckroe Beach Va MCA#39406 M&M #12 Member Mustang Club of Tidewater
Registered: May 99
|
posted 01-09-2005 08:37 AM
LOL....no flames,some can drive a V6 and some can't  This "little" V6 would keep up with a 94 Cobra Thur 3 gear shifts,,until that 8 started to breath deep Does your sons have the cast or tubular exhaust headers from factory?
here's a link to a photo or two.
http://jason.mustangsandmore.ws/95.html [This message has been edited by mustangs68 (edited 01-09-2005).]
IP: Logged |
exlocal
Gearhead Posts: 688
From: hacienda hts., CA, USA
Registered: Dec 2004
|
posted 02-23-2005 09:59 PM
quote:
Originally posted by mustangs68:
LOL....no flames,some can drive a V6 and some can't This "little" V6 would keep up with a 94 Cobra Thur 3 gear shifts,,until that 8 started to breath deep Does your sons have the cast or tubular exhaust headers from factory?
here's a link to a photo or two.
http://jason.mustangsandmore.ws/95.html [This message has been edited by mustangs68 (edited 01-09-2005).]
Sorry, haven't responded earlier. His V6 has the tubular exhaust. Is that a factory option? It sounds kind of throaty with the stock muffler, not bad, but being that I'm comparing it to my 67 with full length headers and a roller cam, I might be one sided. Someday, I may even let him drive my 67 toploader.
------------------
reliving youth
IP: Logged |
Mustangsandmore Forums
