|
Author
|
Topic: fog lights
|
OSU Earl
Journeyman Posts: 2
From:
Registered: Apr 2004
|
posted 04-12-2004 03:10 PM
  
I've been having a problem with my '96 GT's fog lights burning out because water splashes up on them from the front tires. Is there a fix to this? Do the globes on the '99s fit my model year, they seem to be much brighter?
IP: Logged |
hotstang
Gearhead Posts: 347
From: Murfreesboro, Tn USA
Registered: Jun 99
|
posted 04-21-2004 09:17 PM
They will not fit the front Bumper cover..... Fix for ya.. Take out the fog light assemblies and clean them good. Take a SMALL bead of Ultra Copper, or whatever gasket sealant you like, and run it between the lense and the body. Let it dry, now check the gasket on the wirring harness. make sure it is good and clean, not hard. Put it back in if it is good and replace the assembly. GOOD TO GO!!!!------------------
_ _ _ _____________ _ _ _
Matt Kelty
94GT underdrive pullies, K&N filter, 65MM TB, 24LB injectors, 3.73SVO gears, Pro5.0 shifter, JMS custom chip, Centerforce II clutch, MSD 6AL ingintion, 190 LPH fuel pump, and adjustable FPR.
Next mods, springs, sub frame connectors, rear upper and lower control arms Ford Tough 256,000 miles and counting with no problems
IP: Logged |
OSU Earl
Journeyman Posts: 2
From:
Registered: Apr 2004
|
posted 04-22-2004 11:03 AM
Thanks, I'll give it a try. I'll probably have to end up getting new light housings, too, because I think there might be some small cracks in them and the silver reflector on the inside is yellowed. I'll do the sealant on the new ones!
IP: Logged |
hwyman3
Gearhead Posts: 569
From: Southern Maryland, USA
Registered: Jul 2004
|
posted 07-08-2004 10:02 PM
I've had the same problem with the driver's side fog light on my 02. I'm on the third bulb on that side.
IP: Logged | |
Mustangsandmore Forums
